4800
1440
Assuming 120 VAC in a residence maximum watts = 15 x 120 = 1800 Watts. For a continuous load you can support 1440 watts which is 80& of maximum. You need 14 AWG gauge wire.
Wire is rated in ampacity, You can use only 80% of the rated ampacity. Voltage and amperage are inversely proportional. So at 120 volts alternating current you safely run 1800 watts ( I have added a small safety margin). At 240 volts you can run 3600 watts. I hope this has answered you question Ampsxvolts=watts watts/volts=amps
Watts are a unit of power. So 40 watts of power to an LED are the same as 40 watts of power to a fluorescent. Sometimes LEDs are rated in equivalent watts which is an attempt to relate watts to brightness or lumens. You need to compare lumens and the "temperature" of the bulbs in Kelvin to get the comparison I think you are looking for.
Watts = Volts x Amps x Power factor For an AC Unit I am guessing that your PF = .75 so we have 115 x 9.2 x .75 = 793.5 Watts.
1440
Rms is watts that's the amount of watts a speaker is rated for.
Assuming 120 VAC in a residence maximum watts = 15 x 120 = 1800 Watts. For a continuous load you can support 1440 watts which is 80& of maximum. You need 14 AWG gauge wire.
Wire is rated in ampacity, You can use only 80% of the rated ampacity. Voltage and amperage are inversely proportional. So at 120 volts alternating current you safely run 1800 watts ( I have added a small safety margin). At 240 volts you can run 3600 watts. I hope this has answered you question Ampsxvolts=watts watts/volts=amps
5000 watts
A low voltage fuse should be rated for 30 amps.
The rated voltage of an appliance is no guide to its power rating. To find out the power (watts), you will need to look at your washing machine's nameplate, which will indicate both its rated voltage and its rated power.
The Alpine SPS-600 6.5 x 6.75 in. Car Speaker is rated at 240 watts.
You need the formula: Amps * Volts = Watts But you get to do the math.
Assuming that the extension cord is plugged into a normal household receptacle rated at 15 amps the cord will handle 15A x 120V = 1800 watts. If the cord is of any length, at that wattage, you will feel the cord start to get warm like a heating cable.
in watts
# 10 wire is rated at 30 amps. Code states the the wire is only to be loaded to 80%. 80% of 30 = 24 amps. If distance is a factor then the resistance of the wire comes into play. Go up one size to #8 rated at 40 amps, usable 32 amps.