0
Matters how many it has on it.
<<>>
A properly wired receptical will only have one black, one white and one ground wire attached to it. These wires will be pig tailed from the incoming and outgoing cables that are located in the receptical's junction box. The ground wire that is spliced with a pig tail connection also will first goes to the ground screw before it is terminated to the receptical's green ground screw. The reason for splicing the wires this way is to prevent opening the circuit neutral if and when you have to change the receptical for a new one. The same neutral can be used as the common wire from another breaker that might not be turned off when you shut the breaker off to change out the receptacle that needs repllacing. Opening the neutral from another circuit will have that breakers voltage on it. If your body gets between the open neutral and a ground you will receive a sever shock from the current that the other circuit's load is carrying.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is single phase outlet?
It is an outlet that has one hot wire, such as a household receptacle, or two hot wires, such as a dryer outlet (in the US). If the outlet has three hot wires, it would be called a 3-phase or polyphase outlet. These would normally be found only in an industrial setting.
How do you wire two outlets together when you want to continue the run to another outlet?
Use jumper wires to go from one outlet to the other.
What if you have four wires running to your dryer outlet and the outlet is only a three prong one wire is just hanging out is this really even safe?
Have the outlet changed to match the configuration of the dryer plug.
Why would an outlet have two black wires two white wires one red wire and a ground?
The normal colors of a residential outlet are black(hot), white(nuetral), and bare/green(ground). It is common to 'feed thru' an outlet, in other words to bring the power in on one trio of wires tied to the outlet and send it out on another trio of wires also tied to the outlet. If however one white wire is not connected the power will not feed thru properly and whatever outlets are downstream will not work. It is possible to burn up whatever equipment is plugged into the downstream outlets, espiecaly if it is electronic ie; omputers, video equipment etc... Hope this helps. Remember turn off power before working all electrical outlets.
What should you do if your range outlet is missing?
If there is no outlet currently, you will need to have one wired to that location. If the box and wires are in place, yet the recepticle itself is missing, just wire it up.
How do you install a new range receptacle?
A new outlet (running new wire) or replacing an old one (wires already there)? Shut off the Power to that Receptical, diconnect the receptical, and reconnect the New receptical using the Wires from the one you replaced. Then turn the power back on and Test it with a Tester!
How do you wire duplex receptacle using14-3 wire Also with 14-2 wire The wires are already ran to 15 amp breakers and capped off. i would like to hook them up. Thank You?
Sort of confusing are you using 14-3 just for the receptacle with 14-2 to the breaker or the other way around. Either way doesn't matter since you only need 2 wires and a ground for the outlets. The 14-3 should have Red, Black, White and bare wires. 14-2 should have Black, White and bare. All you need are Black, White and Bare. Forget about the red one. Hook the two outlets together with short jumper wires about 6 inches long. Looking at the outlet with the ground facing down, the bare wire goes on the bottom green terminal. The white wire goes on the left side of the outlet. The black goes on the right side of the outlet. Take the 6 inch jumper wire and go from the left side of one outlet to the left side of the second outlet. White to white, black to black, bare to bare. Connect the wires coming from the breaker to the other terminals on one of the outlets. Power comes in to one outlet and then to the second. If the wires are capped in the breaker box, you only need to connect the Black White and bare ones. Do this with the power off.
Which of these can be a hazard involving an electrical outlet?
to many electrical cords plugged into one outlet
When one has a 240V line and checks the voltage across the individual lines why does one read 114V and the other 90V?
Where are you checking the wires at? The service panel or at the outlet? If you're checking at the outlet, it looks like some bad wiring somewhere. If you're reading this at the service panel, then the main entrance wires are faulty (or your electric company is faulty). If the outlet is unloaded you have a resistive neutral. Call an electrician now, if you value your electronics.
How many 14 awg wires can be put into a single gang box with a switch?
For the typical size (I think 18cu. in. box), you can fit 9. Look inside the box on the back wall. it should list how many wires you can have in the box for different gauge wire, typically for 14awg, 12awg and 10awg wires, e.g. 9/14. To count the wires: 1 for each white, 1 for each red, 1 for each black, 1 for all the grounds, 1 for each switch, and 1 for each outlet. Example A: the box has two 14-2 wires for power and one 14-3 for the 3-way switching, and one 3-way switch: 3 whites + 3 blacks + 1 red + 1 for all ground wires + 1 switch = 9 Example B: two 14-2 wires and one outlet: 2 white + 2 black + 1 for ground + 1 outlet = 6 Not all electrical boxes are the same size or rating so look at the specs to see how it is rated.
Where is the fusible link 2001 town and country power outlet?
On a 1998 T&C, it is inside the engine compartment, driver's side. One of the wires coming off the fuse holder. It will be between the fuse holder and the fire wall. One end is secured to one of two terminal posts. On mine, you have to take off both nuts to replace it.
What is meant by 220 volts AC?
In US household electrical service there are two "hot" 110 volt wires and one ground. Only one hot wire is connected to a normal outlet or light fixture. To wire a 220 volt alternating current outlet, both hot wires are connected to the outlet. This is used for appliances that need more power than is provided by 110 volts like electric ranges, clothes dryers, air conditioners.
