Q: How much gas should it take to drive 1600 miles if you get 28 miles per gallon?

Write your answer...

Submit

Related questions

256

It will cost $526 in fuel costs.

1600/19 = 84.211 gallons (rounded) The cost is (84.211) times (whatever you pay for each gallon).

1600 / 22 = 72.7 gallons.72.7 x 3.25 = $236.28

The answer will depend on the cost of gas, surely!

It depends. First you need to know how much a gallon of gas is, then i could finish the answer.

That depends on the gas mileage your car gets and the cost of gas. If you get 20 miles per gallon at $4 a gallon, then cost is 1600/20 times 4 = $320

1,600 miles at 16 miles per gallon = 100 gallons.100 gallons x $4.50 = $450.00

1600 miles / 8 miles per gallon = 200 gallons. Multiply this by the cost of gasolene per gallon. Since the cost varies in different places and times, you will have to research this yourself for your particular situation.

Divide the 1600 by 65 and you'll have your answer !

one mile (1600 meters = 0.994193908 miles)

It would cost $219.55.

1600 miles to drive it.

The answer depends on the (unspecified) units used for 1600. It should be pretty obvious that 1600 miles in centimetres will be quite different from 1600 inches!

Just over 29 hours

1600/30=53.333333 gallons used53.33333*4= $213.331600/30=53.333333 gallons used53.33333*4= $213.33

Since Speed = Distance Traveled / Time, Time = Distance Traveled / Speed. This means Time = 1600 miles / 60 miles per hour = 26.67 hours.

29 hours 5.5 minutes.

Do the math - 80 miles per hour, that's 160 miles in two hours. 160 is 10 percent of 1600, so....20 hours

Mileage for a tractor trailer typically runs four to eight miles per gallon, all factors dependent. So, on 400 gallons, you could run between 1600 and 3200 miles.

Answer: 1600 yd = 0.909090 miles.

Yes.

A 1,600 mile trip at that rate would cost about $192.00in gasoline.

1600 meters is equal to 0.994193908 miles

1600 meters = About one mile (0.994193908 miles).

Study guides