You mean how much heat energy will be lost/transferred as you are losing Joules here. All in steam, so a simple q problem and no change of state.
2.67 kg = 2670 grams
q = (2670 grams steam)(2.0 J/gC)(105 C - 282 C)
= - 9.45 X 105 Joules
-----------------------------------
This much heat energy must be lost to lower the temperature of the steam.
The energy required to raise the temperature 1 degree Celsius of 1 gram of water (1 mL) is 1 calorie (=4.18 J). So for 1 kg, 1Kcal (= 4180 J = 4.18 KJ) is required. To raise it 60 degrees, just multiply by 60 and for 10 kg multiply by 10 again. That would make 2.508 MJ (= 2508000 J) Now this is not completely accurate. The energy required to raise the temperature of water differs at 20 degrees from that at 60 degrees. The difference is small (~0.05 J or something like that) but still present.
Celsius is a unit of temperature, calorie is a unit of energy. Although temperature and energy are closely related they are not the same.calories required to heat 1kg of Alluminium in 350˚ = 910 × 350 = 318500J = 76 123.33 calories requiredcalories required to heat 1kg of Copper in 350˚ = 390 × 350 = 32 624.28 calories requiredcalories required to heat 0.5kg of Alluminium in 350˚ = (910 × 350)÷2 =159250J = 38061.66 calories requirednotice the difference between heating different materials, and heatingdifferent amounts of the same material makes difference in energyrequired
That's going to depend on how much water you're responsible for. Teacup at 60 degrees . . . very few BTU. Swimming pool at 60 degrees . . . many more BTU. It's also going to depend on whether you're talking about Celsius or Fahrenheit degrees. Fahrenheit degrees . . . fewer BTU. Celsius degrees . . . more BTU. (Also, the water will escape as you pass 100.) In general, one BTU is approximately the energy required to raise the temperature of 1 pound of water 1 degree Fahrenheit. You can take it from there, when you reach the job site and determine the exact scope of the work.
200 BTU. I'm assuming your temperatures are in Fahrenheit, since all of your other measurements are in the Imperial system. A BTU is defined as the amount of energy required to raise the temperature of 1 pound water by 1 degree F, so the temperature is raised by 20 degrees, and 10 pounds of water: 20 x 10 = 200
You do not. A degree Celsius is a measure of temperature or thermodynamic energy, whereas a metre is a measure of distance or length in 1-dimensional space. The two measure different things and, according to the basic rules of dimensional analysis, conversion from one to the other is not valid.
3.50 J
1935 J (apex)
15480.80
25degres celsius has more thermal energy
The amount of heat required to increase the temperature of the substance to 1 degree greater than that of the initial temperature of the body!
1935 J (apex)
false its 1 degrees Celsius
80cal/g
You will lose thermal energy.Heat (energy) will always flow from warmer to cooler.
Kelvin is a measure of temperature or thermodynamic energy, and is an absolute measure. Degrees Celsius are a used to measure temperature on a scale with an arbitrary zero.
21 Kg = 2100 grams to rise the temperature of this amount of water by 2 degrees Celsius you need 2*2100 = 4200 calories or 17572.8 Joules.
The energy required to raise the temperature 1 degree Celsius of 1 gram of water (1 mL) is 1 calorie (=4.18 J). So for 1 kg, 1Kcal (= 4180 J = 4.18 KJ) is required. To raise it 60 degrees, just multiply by 60 and for 10 kg multiply by 10 again. That would make 2.508 MJ (= 2508000 J) Now this is not completely accurate. The energy required to raise the temperature of water differs at 20 degrees from that at 60 degrees. The difference is small (~0.05 J or something like that) but still present.