To convert the weight of the sand into a volume and find out how much you need you would need to know the density of the sand as the more dense it is the less sand there will be in a 50lb bag and the more bags you would then need to fill the yard
To properly answer this question, one would need to know the volume of a "bag", since "bag" isn't any standard of volume or weight. Typical Portland Cement has a density to 1505kg / cubic meter. In addition, one would also need to know the coarseness of the gravel, as the ability of the sand and cement to fill in the aggregate depends heavily on the average size of the gravel pieces.
volume of 1 cement bag is 0.035cu.m.
Volume of sand required = 6 ft * 5 ft * 1 ft = 30 cubic feet. A bag = 3 cubic feet so number of bags required = 30/3 = 10 bags.Volume of sand required = 6 ft * 5 ft * 1 ft = 30 cubic feet. A bag = 3 cubic feet so number of bags required = 30/3 = 10 bags.Volume of sand required = 6 ft * 5 ft * 1 ft = 30 cubic feet. A bag = 3 cubic feet so number of bags required = 30/3 = 10 bags.Volume of sand required = 6 ft * 5 ft * 1 ft = 30 cubic feet. A bag = 3 cubic feet so number of bags required = 30/3 = 10 bags.
The answer will depend on how deep a layer of sand.
Density of cement is 1.44TON/CUMEC. density of gp2 is 2.1TON/CUMEC AROUND. SO ANSWER IS MASS DIVEDED BY DENSITY U VL GET VOLUME OF GROUT.
One bag of Plaster (25kg) is about £5-£6. One bag will do 10m
The weight of a filled sandbag can vary based on the type of sand and how tightly it is packed. On average, a filled sandbag typically weighs around 40-50 pounds (18-23 kilograms).
It is all going to depend on what you put in them. The density of the sand, dirt or mud is what is going to determine that. Sand is the lightest you can use. Getting some nice mud or clay is going to cause it wo weigh a little more. Sand is about 10-13lb Mud or clay is aroun 18-20lbs A sand bag weighs (55lbs) 25kg.
50 pounds
700
[object Object]
A 25 pound bag of anything (sand included) weighs 25 pounds.
there is 5 shovels full in a 25kg bag of cement
One 25kg bag of bentonite will fill a void of 0.057m3. So 1 tonne will fill a void of 2.28m3. Hope this helps. Andy Chartered Tunnelling Engineer
To convert the weight of the sand into a volume and find out how much you need you would need to know the density of the sand as the more dense it is the less sand there will be in a 50lb bag and the more bags you would then need to fill the yard
This question is essentially asking 25kg - 6 000g. 25kg can be converted to 25 000g making it comparable. It would be this: 25kg - 6 000g = 25 000g - 6 000g = 19 000g Therefore you would have 19 000g or 19kg left over after using them.