answersLogoWhite

0


Best Answer

With a 6 inch diameter and with 1 mile = 5280 ft = 63360 inches.

Volume = (cross sectional area) x ( length) = pi * r2 * length = pi*(3 in)2 * 63360 in = 1791461.79 cubic inches.

1 gallon = 231 cubic inches, so it is 7755.25 gallons

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much water does a hose 6 diameter and a mile long hold?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the volume of water in a 333 meter long hose 2.5 centimeters in diameter?

There need not be any water in the hose! Its capacity is approx 163461 cm3 or 163.5 litres.


How much water is in a 3 inch hose 25 feet long?

The capacity of a 25 ft hose with a diameter of 3 inches is 1.23 cubic feet. That is the maximum volume of water in the hose: there need not be any!


Where was the longest water hose ever made?

The longest water hose was made in Germany. It is painted with red polyurethane enamel. It measures 410ft. long and 20in. in diameter. It connects to a faucet that is 35ft. 5in. in height.


How do you level a house with a water level?

Take a 3/4" clear plastic hose about 30ft long + or - hold the two ends together fill with water 3ft from top or overflow. Hold one end of the hose water level at the desired height of the structure The opposite end of the hose will be level to the exact same at the other end 6 ,10 ,15 or 20ft away for example. The hose Dock


How many gallons of water will a cylinder capped on both ends hold that is 6 inch inside diameter and 6 feet long?

8.8 gallons of water.


How much water can a pipe 48 inches long and a diameter of six inches hold?

432pi. formula:π(r^2)h


How far does water travel from a fire hose?

There are many different types of fire hoses, but the type you're probably picturing is called an "attack hose" that's the hose that takes water from the pumping system to the nozzle. It's the business end of the operation. The typical attack hose is 1530 cm long and has an inner diameter of as much as 7.6 cm. The volume of a hose is the length of the hose, times the area of its circular cross-section. With an inner diameter of 7.6 cm, an attack hose has a cross-section of πr2=3.14*3.8^2= 45.34 square cm. So, the volume of water in a full attack hose is 1530*45.34= 69370.2 cubic cm. That's about 18.32 gallons.


How long can your suction and discharge hoses be on an above ground pool?

as long s you like however the longer they are the more water turnover you lose as a result of the friction in the hose or pipe, If you need to move water over a long distance make the diameter of the pipe as large as possible.


What is the heater hose size for a ford f150?

The heater hose for a 2004 F-150 Heritage is 21 inches long. End number one has an inner diameter of 0.78 inches and an outer diameter of 1-inch. End number two has an inner diameter of 0.75 inches and an outer diameter of 0.78 inches.


How do you paint the pool while the water coming out of the relief valve?

Get a piece of pipe, a couple inches in diameter and about 3 or 4 feet long, and lay it in the drain pot. Feed a hose from a utility pump into the pipe. Attach a hose to the other fitting and turn-on the pump. This solution will capture the water before it enters the pool, and it will keep the hose off the surface and out of the way.


How many gallons of water in a 2.5 inch hose 100 feet long?

There need not be any water at all in the hose! The capacity of the hose is 3.41 cubic feet.


What is a soaker hose is it better?

The soaker hose is found at most retail stores. Its a long thick hose with small pinholes for where the water comes out. Its used to water the lawn and flowers.