Cylinder volume, V = 3,14159 x r2 x h
V (cm3) = 3,14159 x 52 x 450 = 353 428,875 mL = 353,428 L (liters)
It is as long as necessary. It can be any length. The diameter has to do with how big around it is, nothing to do with the length. Standard pipe length is 20 feet.
Diameter is a length measurement. Cubic inches is a volume measurement. Diameter cannot be measured in or converted to cubic inches.
The volume of water in one meter of a 22mm-diameter pipe is: about 0.1 US gallons.
For 100mm pipes, the type normally used for residential drainage, the minimum acceptable falls are 1:40 for Foul Water and 1:100 for Surface Water. Larger diameter pipes may have gentler gradients in certain circumstances.
44,912.4 gallons of water per 4,300 feet.
300mm is a very low head, you can't expect much flow through that pipe, but you can work it out from the mechanical energy balance equation.
4580.4528 cubic ft. I am assuming that the undefined diameter units was also in ft.
You need to know the length and radius (1/2 the diameter) of the cylinder. From there, use this formula: V = radius2x Pi x length
1.219197
Depends on the water pressure, and the diameter and length of the hose. Sorry, but there really is no one answer.
The volume is 31.809 cubic feet.
First off, what you appear to be asking for is the circumference, the length of area around a circle(or in this case, a body of water). To find the circumference, measure for the diameter, the diameter is the length of one side of a circle to another, this distance must go through the center of the circle. All you have to do is multyply the Diameter by pi.