Best Answer

If supported at its ends and loaded in the middle as worst case, it can safely take 25 pounds. It can actually take 100 pounds but safety codes will not allow that.

If the load is evenly distributed over the length, it can take twice as much load.

Q: How much weight can a piece of wood hold that is one quarter inch thick 30 inches long and 14 inches wide?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

The US coin "quarter" (25 cents) is 0.955" in diameter, 0.069 inches thick

.004 inches thick

The United States one quarter coin has a thickness of 1.75 millimetres, or, rounded to three significant figures, 0.0689 inches.

If you support it at the ends and load it in the middle which is worst case, it can hold about 650 pounds before breaking. The answer involves engineering analysis of strength of materials and beam theory.

1 Quarter = 1.75mm Thick 6,000,000 quarters x 1.75mm = 10,500,000mm 10,500,000mm / 25.4mm per inch = 413,385.826 inches high Final Answer: 413,385.826 inches

Related questions

The US coin "quarter" (25 cents) is 0.955" in diameter, 0.069 inches thick

.004 inches thick

The US coin "quarter" (25 cents) is 0.955" in diameter, 0.069 inches thick

The United States one quarter coin has a thickness of 1.75 millimetres, or, rounded to three significant figures, 0.0689 inches.

6 inches long by 4 and a quarter inches high, .016 inches thick, according to USPS website.

There are 25.4 millimetres in an inch. Therefore a millimetre is 0.03937 inches. To find out how many quarter inches are in a millimetre, you'd multiply by 4 as there are 4 quarters in a unit. 0.03937*4 is 0.1575 quarter inches in a millimetre.

A 16 mil piece of plastic is as thick as 0.04 centimeters. 16 mil would equal 0.016 inches. As you can see, this piece of plastic would not be very thick.

two and a quarter inches is desired for driveway for most domestic vehicles

2000 pounds.

A US quarter is 1.75 mm thick. Canadian quarters are 1.58 mm thick.

Cork board at 2 inch thick by 14 inch width by 36 inches in length will support what weight in water? (buoyancy factor) is a physics problem.

That completely depends on the material of which the pipe is composed. The question neglects to include this vital piece of information, so no answer can be calculated.