0
Because a mile is 1760 yards and there are 3 feet in a yard.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
16300 ft equal how many miles?
1 mile = 5280 ft. So set up a proportion and you will get: 1 mile/5280 ft = x miles/ 16300 ft. Divide 16300 by 5280 and you should get approx. 0.309 miles (to the correct number of significant digits).
Why are there 5280 feet in a mile?
The basic concept of the mile originated in Roman times. The Romans used a unit of distance called the mille passum, which literally translated into "a thousand paces." Since each pace was considered to be five Roman feet—which were a bit shorter than our modern feet—the mile ended up being 5,000 Roman feet, or roughly 4,850 of our modern feet. If the mile originated with 5,000 Roman feet, how did we end up with a mile that is 5,280 feet? Blame the furlong. The furlong wasn't always just an arcane unit of measure that horseracing fans gabbed about; it once had significance as the length of the furrow a team of oxen could plow in a day. In 1592, Parliament set about determining the length of the mile and decided that each one should be made up of eight furlongs. Since a furlong was 660 feet, we ended up with a 5,280-foot mile.
How maney inches are in 24 miles?
set up conversion ratios: 1 mile = 5,280 feet 1 foot = 12 inches 24 miles * ( 5,280 ft / 1 mile) * (12 inches / 1 ft) 24*5280*12 = 1,520,640 inches
74.25 feet per second equals mph?
(74.25 ft/sec) * (mile/5280 ft) * (60 sec/min) * (60 min/hr) You have to set it up with feet in the denominator to cancel feet in the numerator (so divide by 5280 to get miles per second); then seconds in the numerator to cancel the second in the denominator to get miles per minute; then minutes in the numerator to cancel minite in the denominator to get miles per hour. Along with setting up the units of measure, put the appropriate numbers with the units. From there, all you have to do is take 74.25, divide by 5280, multiply by 60, and multiply by 60 again.
How many feet equal square feet?
Length times width. If you have something 2 feet long by 2 feet wide it is 4 square feet. A foot is one dimensional measurement. A square foot is 2-dimensional and is a square unit footxfoot. (ft2) There is no set amount of feet in a square foot, because square feet is a measure of area and feet are a measure of length.
16300 ft equal how many miles?
1 mile = 5280 ft. So set up a proportion and you will get: 1 mile/5280 ft = x miles/ 16300 ft. Divide 16300 by 5280 and you should get approx. 0.309 miles (to the correct number of significant digits).
Why are there 5280 feet in a mile?
The basic concept of the mile originated in Roman times. The Romans used a unit of distance called the mille passum, which literally translated into "a thousand paces." Since each pace was considered to be five Roman feet—which were a bit shorter than our modern feet—the mile ended up being 5,000 Roman feet, or roughly 4,850 of our modern feet. If the mile originated with 5,000 Roman feet, how did we end up with a mile that is 5,280 feet? Blame the furlong. The furlong wasn't always just an arcane unit of measure that horseracing fans gabbed about; it once had significance as the length of the furrow a team of oxen could plow in a day. In 1592, Parliament set about determining the length of the mile and decided that each one should be made up of eight furlongs. Since a furlong was 660 feet, we ended up with a 5,280-foot mile.
How maney inches are in 24 miles?
set up conversion ratios: 1 mile = 5,280 feet 1 foot = 12 inches 24 miles * ( 5,280 ft / 1 mile) * (12 inches / 1 ft) 24*5280*12 = 1,520,640 inches
How do you convert height to miles?
You need to specify the height of what. height can be messured in the same manner as length. i.e. something that is 5280 feet high is one mile high. Therefore an item at 10,000 feet above ground at one fixed point it can be said to be 1.89 miles high. The calculation is e.g. 10,000(feet) divided by 5280.00(feet) = 1.89 miles. If the height is in yards then its 333.333 yards high divided by 1760.00(yards in a mile) = 1 (mile) However, if you are looking at converting aircraft height and not building heights then The nautical mile (symbol NM ) is a unit of length that is about one minute of arc of latitude measured along any meridian, or about one minute of arc of longitude at the equator. By international agreement it has been set at 1,852 metres exactly (about 6,076 feet). e.g 1 foot = 0.000164579 nautical miles 1000 feet = 0.164579 NM 10,000 feet = 1.164579 NM
74.25 feet per second equals mph?
(74.25 ft/sec) * (mile/5280 ft) * (60 sec/min) * (60 min/hr) You have to set it up with feet in the denominator to cancel feet in the numerator (so divide by 5280 to get miles per second); then seconds in the numerator to cancel the second in the denominator to get miles per minute; then minutes in the numerator to cancel minite in the denominator to get miles per hour. Along with setting up the units of measure, put the appropriate numbers with the units. From there, all you have to do is take 74.25, divide by 5280, multiply by 60, and multiply by 60 again.
Why are drag races a quarter mile in length?
They wanted a set distance, and a quarter mile worked out. Many tracks are adopting an eighth mile format now though.
About how many feet is a couch?
There is no set length, but most couches are between 6-8 feet.
How large does a stream have to be to qualify as a river?
it has to be over 4 feet wide and 6-7 feet deep to be a river.
What is 21600 nautical miles in statute miles?
A nautical mile is one minute of arc at the earth's equator. Since there are 60 minutes in a degree and 360 degrees in a circle, the circumference of the earth is exactly 21,600 nautical miles by definition. Because the size of the earth actually changes with time, temperature, proximity to the Sun, etc. This standard varies with time. After great debate, the international standard set a nautical mile as 6,076 feet. A statute mile consists of 5,280 feet. Thus, doing the math (6,076*21,600/5280) we find the circumference of the earth to be 24,856.36364 statute miles when using this method.
How do you know if half a mile is further than half a km?
Either express the half of a mile in kilometers; or the half of a kilometer in miles. For example, 1 mile is 5280 ft = 1.609km. So you would take half of this, which is about 0.8km. You can see that this is greater than 0.5km, so half a mile is further than half a kilometer. You are converting one expression of units to their equivalent in another set of units.
Where was 8 mile set in what city?
8 mile was set in new yourk
How many feet equal square feet?
Length times width. If you have something 2 feet long by 2 feet wide it is 4 square feet. A foot is one dimensional measurement. A square foot is 2-dimensional and is a square unit footxfoot. (ft2) There is no set amount of feet in a square foot, because square feet is a measure of area and feet are a measure of length.
