Best Answer

These measurement can not be converted, because litres are a measure of volume and meters are a measure of distance.

Q: How to convert liters per second to meters per second air velocity?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

the tangential velocity is equal to the angular velocity multiplied by the radius the tangential velocity is equal to the angular velocity multiplied by the radius

The conversion factor is .277. So, cubic meters per hour x .277 = liters per second

Multiply the velocity in cm/s by the cross section area of the flow in sq cm.

Just divide the distance by the time. The answer is in meters/second. If you want to convert that to the more commonly used kilometers/hour, multiply the number of meters/second by 3.6.

There is no sensible answer to this question. A metre per second is a measure of linear velocity, with dimensions [LT-1]. A litre per second is a measure of flow rate, with dimensions [L3T-1]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.

Related questions

Equation: liters per second x 86.4 = cubic meters per day

the tangential velocity is equal to the angular velocity multiplied by the radius the tangential velocity is equal to the angular velocity multiplied by the radius

The conversion factor is .277. So, cubic meters per hour x .277 = liters per second

Hertz are a measurement of frequency, where meters per second is a measurement of velocity (speed). The two cannot be converted. Hertz is cycles per second, like a radio wave or sound wave. An example is a radio station transmitting on 10.0 MegaHertz (MHz) This indicates the radio wave oscillates 10 Million times per second. Meters per second can be used to measure, for example, the velocity of a car or bullet. Trying to convert frequency to speed would be like trying to convert Miles per hour to liters... it doesn't work.

Multiply the velocity in cm/s by the cross section area of the flow in sq cm.

Acceleration is the rate of change of velocity - how fast a velocity changes. Therefore, its units are naturally (meters/second) / second, usually written as meters/second2.Acceleration is the rate of change of velocity - how fast a velocity changes. Therefore, its units are naturally (meters/second) / second, usually written as meters/second2.Acceleration is the rate of change of velocity - how fast a velocity changes. Therefore, its units are naturally (meters/second) / second, usually written as meters/second2.Acceleration is the rate of change of velocity - how fast a velocity changes. Therefore, its units are naturally (meters/second) / second, usually written as meters/second2.

revolutions are angular velocity (w), so you need to know radius (r) to convert to velocity (v) meters per second. not linear velocity. v = wr. For example 30 revs per min is 30/60 revs per second; over a 2 meter radius velocity is 30/ 60 x 2 = 1 meter per second

Just divide the distance by the time. The answer is in meters/second. If you want to convert that to the more commonly used kilometers/hour, multiply the number of meters/second by 3.6.

Divide the distance by the time. That will give you the speed in kilometers/hour. Then divide that by 3.6 to convert to meters/second.

To convert acceleration to velocity, you must integrate.Similarly, to convert velocity to distance, you must integrate a second time. This is why the distance covered by a projectile is a second order quadratic equation.

250,000 liters per second.

Ther velocity when falling 1000 meters is v=sqroot(2x1000x9.8) = 140 meters/second.