Q: IS Maximum power will occur somewhere between 80 and 85 of 1RM.?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

True.

True

22

Let the sum of series a1,.., an = A. Since ai >0. Then the maximum possible product of a1,..,an is = (A/n)n. This result basically comes the relation between the arithmetic mean and geometric mean of n positive numbers. A/n >= (a1...an)(1/n). The equality case of the above relation gives the maximum product (by raising the power by n on both sides).

It has an absolute minimum at the point (2,3). It has no maximum but the ends of the graph both approach infinity.

Related questions

True.

True

TRUE - Deepak Daswani

The maximum power of a class 2 power can be between 40-50v. You should always make sure you are aware what is the maximum output for your electronics.

Somewhere between a little and a lot.

Max efficiency of energy transfer can only occur when impedence source matches the impedence of the load.

usually somewhere between one and three. Do you have power windows?

Maximum power rating describes the maximum power at which a device can operate without reaching an excessive temperature. For example, in the case of a resistor, if its maximum power rating is exceeded, then it may burn out.

indicated power is maximum out put power of the engine brake power is the... brake power =T*W T=torque W= angular velocity of wheel indcated power =BHP+Friction. Mechanical Efficiency :- BHP/IHP

it depends if you are on the heat laxer network or not if your not on the network about 10,000 but if you have the p90x heatlaxer network somewhere in the area of 100,000

The horse power of the engine of a dodge charger coupe manual 1972 is between 100 and 110 for a three speed and between 150 and 330 for a four speed, depending on the type of carburetor. It has a maximum speed of 120 mph.

No because a circuit without power applied can only be shown to be a short circuit after the power is applied between the 'right' two points.