8.325 a sq meter.
0, because a lineal meter has an area of 0
The cost would be ($25) multiplied by (the number of square meters to be carpeted).
In Ohio we charge 5.50 a yard, so technically that costs $6.58US a square meter. That price however does not include the actual carpet to be installed, or the 'cushion' or pad underneath the carpet, just the labor. retail price on some of the least expensive carpet i have seen (that was worth putting in) was around $8.40US a square meter. which with cushion would cost you somewhere in the neighborhood of $17.00US a square yard if you include cushion.
$53.91 per square yard. That's pretty expensive carpet...........
Carpets are sold per square meter (unless you find an off cut the size required). Your longest length is 7m, so your carpet will be 7sqm @ £20 per sqm = 7 x £20 = £140. Would exclude gripper rod, underlay and fitting though!
1300 square feet of carpet is 144.44 square yards, putting your total at $2,166.67.
i think there would be 500 per meter cube instead of 500 per meter square.
I would believe 1 square meter
A room size of 15'4" x 12'0" contains 184.8 square feet. There are 9 square feet in a square yard. You would need 20.53 square yards of carpet. With a carpet cost of $12.00 a square yard, the cost would be $246.36 plus tax.
depends on the room size
1 square meter is made up of 1,000,000 square millimeters. This can be figured out because if there are 1,000 millimeters in one meter, then there would be 1,000,000 square millimeters in one square meter.
That can be measured in square meters.
That would depend on what material you have a square meter of paper is going to be lighter than a square meter of rocks. Square meters don't just convert to tons you have to have a square meter of something
The answer depends on where in the world you are buying and the quality of the carpet.
There are 9 square feet in a square yard, so you have 6300 square feet of carpet. Each carpet square is 9 square feet (3 x 3 = 9)... So you would need 700 36" tile squares.
You multiply the width by the length to get the area. In this case the answer would be 120 square feet of carpet.
The total area is 286 square feet which equals 31.78 square yards.If you're allowed to have 'seams' - where the carpet has been cut to fit, you would need 32 square yards, costing a total of 383.68.However - if the carpet needs to be one single piece - with no seams, you would need 40 square yards, costing a total of 479.60 - but you'd have quite a bit left over.
Because a square meter is two dimensional and a cubic meter is three dimensional, there would theoretically be an infinite number of square meters within a cubic meter.
That depends entirely on the cost of the carpet per square yard (or square metre) !
You would need 20 square yards of carpet which is 180 square feet.
YES, because a carpet 5M by 5M is a 25 square metre carpet and would fit into a 30 square metre room.