Q: If a wheel is 68 inches in diameter and the spokes are spaced on the wheel 19.41 inches apart what is the linear distance between the points where the two spokes attach to the wheel?

Write your answer...

36 inches. The radius is the distance from the centre to the outside or circumference and trhe diameter is the distance across passing through the centre. Therfore the diameter is twice the distance of the radius.

Well now, that depends. What do you mean when you say "a 44 inch circle" ? -- If "44 inches" is the distance across the fattest part of the circle, then its diameter is 44 inches. -- If "44 inches" is the distance from the center of the circle out to the edge, then the diameter is 88 inches. -- If "44 inches" is the distance all the way around the circle, then the diameter is 44/pi = 14 inches (rounded)

7

The diameter will be 12.41408556 inches

A baseball's diameter is approximately 2.9 inches. It's circumference must be between 9 and 9.25 inches, therefore its must be between 2.87 and 2.94 inches.

slightly varies, but between 2.87 inches and 2.94 inches.

... twice that. The radius is the distance from the centre to the edge, in a straight line. The diameter is that line continued from the centre to the edge, in the opposite direction. So a radius of 2 inches means a diameter of 4 inches.

According to baseball manufacturer The Rawlings Company, the diameter of a baseball is between 2.86 inches and 2.94 inches.

What is the distance between Los Angeles and Paris France in inches?

The inches in a diameter = 2 X inches in the radius. Or, inches in a diameter = inches in circumference / pi

I'm not completely sure what a "2.5 inch circle" is. Is that the distance all the way across the circle (diameter), or is it the distance from the center of the circle to its curve (radius) ? If diameter = 2.5 inches, then area = 4.909 square inches If radius = 2.5 inches, then area = 19.635 square inches

A bowling ball has an initial circumference between 26.704 inches and 27.002 inches with a diameter between 8.500 inches and 8.595 inches.

A bowling ball has an initial circumference between 26.704 inches and 27.002 inches with a diameter between 8.500 inches and 8.595 inches.

A bowling ball has an initial circumference between 26.704 inches and 27.002 inches with a diameter between 8.500 inches and 8.595 inches.

Since π is the ratio between the diameter and the circumference, Diameter = 72 in /π = 22.92 in

What is a "8 inch ball" ? Is 8 inches the diameter ? Then its diameter is 8 inches. Is 8 inches the radius ? Then its diameter is 16 inches. Is 8 inches the circumference ? Then its diameter is about 2.546 inches (rounded).

The diameter of a softball is about 4 1/2 inches in diameter. The diameter of a softball is about 4 1/2 inches in diameter.

The diameter of a circle represent the distance across it when divided in half. 1 millimeter equals .04 inches (rounded to one significant figure). Therefore 12 mm equals .05 inches.

A diameter is not a form of measurement. It is the distance across a circle. That question is impossible to answer.

5.89248 × 1015 inches

This depends on the diameter of each stump. The width of the wicket is a total of 9 inches. The maximum and minimum diameters of each stump are 1½ inches (3.81 cm) and 1⅜ inches (3.49 cm)

In order to fully understand what the radius of a given circle is, you must know the diameter. The diameter is the distance across the circle through the center. The radius of a circle is half the diameter. For example, if the diameter of a circle is 8 inches, then the radius would be 4 inches.

Given an atom with diameter of 100 picometers, the diameter in inches is 4 nano inches.

Diameter = 117/pi inches

The distance between Texas and Florida is about 1,350 miles.