LIFE SAFETY WARNING! [disclaimer]
Electricity is dangerous!
You can be injured or killed!
Improper installations can cause fire, injury and death!
Should you be doing this yourself?)
This is one of those questions - if you know this little, you shouldn't be doing what you are planning...
No disrespect intended, but this is SO basic that it suggests you have not studied the subject at all!
There are many good reference books and course books to study from.
Don't do it!
If you do this work yourself, always turn off the power
at the breaker box/fuse panel BEFORE you attempt to do any work
AND
always use a meter or voltage indicator
to insure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
No, the ground wire should be attached to the green or bare copper wire. The black wires are typically live or hot wires and should never be connected to the ground wire.
To hardwire an appliance, first ensure the power is turned off at the circuit breaker. Remove the appliance's cover plate to access the wiring compartment, then connect the appliance's wires to the corresponding electrical supply wires—typically black to black (hot), white to white (neutral), and green or bare to ground. Secure the connections with wire nuts or terminal screws, and then carefully tuck the wires back into the compartment. Finally, replace the cover plate and restore power at the breaker.
You have a 3 way switch. Your black wire is the hot wire. Your green wire is the ground wire. Your red and white wires go to the light and other switch. You should have gotten a wiring diagram with your switch.
there are plenty! (megan fox shows up btw. she has blue/green eyes with black hair)
Copper(II) nitrate will turn from green to black when heated due to the decomposition of the compound. The green color is due to the presence of copper ions, which decompose into copper oxide when heated, resulting in the color change to black.
S/B small Metal cover on front bottom right side. Simply open cover, be it snap off or small screw. Then use existing HARDWIRE (romex) and twis the black existing to the black on diswasher, the white twist to the white, and the green should have a green screw in the same area you opened at bottom right to secure. The green would be the ground for safety.
AntiFreeze
definitely not black my moms a designer and she once fired someone for wearing a green top with black jeans
If you are referring to the sight glass, the liquid beneath the glass should flow clear without bubbles when properly charged with refrigerant.
The recharge is located right beside the radiator cap. There should be a green Cap on and it should be labeled AC recharge.
With black skinnies, you should wear bright colors. Such as neon green of a really hot pink.
No. Green should always signify the ground wire.
You should wear Black or blood red. Hope I helped black is pretty awesome but i also love dark blue or green green is fun and funky
You could paint it black or make it green and black stripes or white and green stripes. or if you really love green paint it green or just keep it white well you don't have to listen to me ask a friend.
Yes green is the new black!!!! SO GO GREEN!!!! Yes green is the new black!!!! SO GO GREEN!!!!
Purple, definetely!
green,white,black or earth color