0
In the Universal Numbering System, tooth number 1 is your maxillary central incisor.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What tooth is number 12?
In the Universal Numbering System which is most commonly used in the United Sates, tooth number 12 refers to the maxillary (upper) left first premolar (bicuspid).
Which is tooth 7?
tooth 7, according to the universal system of tooth notation is maxillary right lateral incisor
What is an odontogram?
An odontogram is a chart dentists use to document a patient's existing dental restorations and also to record planned dental restorations and treatment. The odontogram may be a drawing that closely approximates the appearance of actual teeth, or may be stylized and highly abstracted. The teeth are numbered on odontograms according to two major systems--the Universal System used primarily in the U.S., and the F.D.I. (Federation Dentaire Internationale) System used widely in Europe. The Universal System begins numbering the adult teeth with the upper right third molar being tooth #1. The upper teeth are numbered consecutively around the arch to the upper left third molar, which is tooth #16. Then the numbering drops down to the lower arch and continues with the lower left third molar being #17 and continues, consecutively again, back around to the lower right third molar being tooth #32. The deciduous (baby) teeth are "numbered" with letters, starting with the upper right second deciduous molar being #A and continuing similarly to the adult teeth until we reach the lower right deciduous second molar, which is #T (humans normally have 20 deciduous teeth and 32 permanent teeth.) The F.D.I. system uses a quadrant system of notation where we begin with the central incisors being teeth #x1 and count back to the third molars, which are teeth #x8. The number "x" indicates which quadrant the tooth is in--1 for the upper right quadrant, 2 for the upper left, 3 for the lower left and 4 for the lower right. Deciduous teeth are numbered by indicating quadrants 5,6,7, and 8, along with the individual tooth number. So, in the Universal System, the adult upper right central incisor would be tooth #8, and the upper right deciduous central incisor would be tooth #E. In F.D.I. notation these same teeth would be #11 and #51. There are many other tooth numbering systems still in use besides Universal and F.D.I.--in particular the Palmer System is often used by childrens dentists and orthodontists. Similarly, there are many, many styles of odontograms in use. The individual dentist will choose the odontogram s/he is most comfortable with and which best suits his or her needs. Choice of odontogram and numbering system can be an important issue in forensic dentistry (forensic odontolgy), where dental records are used to identify an unidentifed deceased person. A forensic dentist may receive dental charts and odontograms from a dentist using nonstandard numbering or an unusual type of odontogram, and proper interpretation of these records becomes very difficult.
What is it an odontogram?
An odontogram is a chart dentists use to document a patient's existing dental restorations and also to record planned dental restorations and treatment. The odontogram may be a drawing that closely approximates the appearance of actual teeth, or may be stylized and highly abstracted. The teeth are numbered on odontograms according to two major systems--the Universal System used primarily in the U.S., and the F.D.I. (Federation Dentaire Internationale) System used widely in Europe. The Universal System begins numbering the adult teeth with the upper right third molar being tooth #1. The upper teeth are numbered consecutively around the arch to the upper left third molar, which is tooth #16. Then the numbering drops down to the lower arch and continues with the lower left third molar being #17 and continues, consecutively again, back around to the lower right third molar being tooth #32. The deciduous (baby) teeth are "numbered" with letters, starting with the upper right second deciduous molar being #A and continuing similarly to the adult teeth until we reach the lower right deciduous second molar, which is #T (humans normally have 20 deciduous teeth and 32 permanent teeth.) The F.D.I. system uses a quadrant system of notation where we begin with the central incisors being teeth #x1 and count back to the third molars, which are teeth #x8. The number "x" indicates which quadrant the tooth is in--1 for the upper right quadrant, 2 for the upper left, 3 for the lower left and 4 for the lower right. Deciduous teeth are numbered by indicating quadrants 5,6,7, and 8, along with the individual tooth number. So, in the Universal System, the adult upper right central incisor would be tooth #8, and the upper right deciduous central incisor would be tooth #E. In F.D.I. notation these same teeth would be #11 and #51. There are many other tooth numbering systems still in use besides Universal and F.D.I.--in particular the Palmer System is often used by childrens dentists and orthodontists. Similarly, there are many, many styles of odontograms in use. The individual dentist will choose the odontogram s/he is most comfortable with and which best suits his or her needs. Choice of odontogram and numbering system can be an important issue in forensic dentistry (forensic odontolgy), where dental records are used to identify an unidentifed deceased person. A forensic dentist may receive dental charts and odontograms from a dentist using nonstandard numbering or an unusual type of odontogram, and proper interpretation of these records becomes very difficult.
What is the tooth fairy's lucky number?
The tooth fairy's lucky number is 7.
Dose everybody have there own tooth fairy?
There is no tooth fairy. But, for your kid's benefit (I hope) there is one universal tooth fairy, just like Santa Claus!
What is the JP tooth system?
According to the ADA 2006 completion guide found here: http://www.scdhhshipaa.org/Internet/hrsm/mdc/mdcd_img.nsf/(WebFiles)/C164A61DA0E2ECAD8525745F005F52B8/$FILE/Dental%20completion%20guide%20FINAL%2005242008.pdf Tooth System (optional). Enter "JP" when designating teeth using ADA's universal/National Tooth Designation System (1-32 for permanent dentition and A-T for primary dentition). Enter "JO" when using the International Standards Organization System. The ADA system is used in the USA, ISO internationally. Or, in other words, JP in the "Tooth System" column (ADA 2006 #26) indicates that the values in the "Tooth number(s) or Letter(s)" column (ADA 2006 #27) are either: ADA system: child teeth lettered A through J for top teeth (facing the patient, from the inside of the mouth, left to right) and K through T for the bottom teeth (facing the patient, from the inside of the mouth, right to left); or adult teeth numbered 1 through 16 for the top set, 17 through 32 for the bottom set, the same way. If you imagine the teeth laid out as though the mouth were opened so far that the teeth were all in the same plane, top set in an upward arc and bottom set in a downward arc, the teeth are lettered/numbered clockwise from the leftmost of the top set, all the way around to the leftmost of the bottom set, under it. You can see an example of the adult numbering here: http://www.oasisadvancedwellness.com/images/tools/tooth-chart.gif and both adult and children numbering/lettering here: http://www.toothiq.com/dental-glossary/dental-definition-tooth-numbering-systems.html ISO system: Two digits represent each tooth. The first digit indicates the quadrant (1=adult upper right, 2=adult upper left, 3=adult lower left, 4=adult lower right; similarly 5-8 are the same quadrants in the same order for child teeth). The second digit represents the tooth within that quadrant (1=central incisor, 2=lateral incisors, 3=canines, 4=1st premolars, 5=second premolars, 6=1st molars, 7=2nd molars, 8=3rd molars). According to the ADA 2006 completion guide found here: http://www.scdhhshipaa.org/Internet/hrsm/mdc/mdcd_img.nsf/(WebFiles)/C164A61DA0E2ECAD8525745F005F52B8/$FILE/Dental%20completion%20guide%20FINAL%2005242008.pdf Tooth System (optional). Enter "JP" when designating teeth using ADA's universal/National Tooth Designation System (1-32 for permanent dentition and A-T for primary dentition). Enter "JO" when using the International Standards Organization System. The ADA system is used in the USA, ISO internationally. Or, in other words, JP in the "Tooth System" column (ADA 2006 #26) indicates that the values in the "Tooth number(s) or Letter(s)" column (ADA 2006 #27) are either: ADA system: child teeth lettered A through J for top teeth (facing the patient, from the inside of the mouth, left to right) and K through T for the bottom teeth (facing the patient, from the inside of the mouth, right to left); or adult teeth numbered 1 through 16 for the top set, 17 through 32 for the bottom set, the same way. If you imagine the teeth laid out as though the mouth were opened so far that the teeth were all in the same plane, top set in an upward arc and bottom set in a downward arc, the teeth are lettered/numbered clockwise from the leftmost of the top set, all the way around to the leftmost of the bottom set, under it. You can see an example of the adult numbering here: http://www.oasisadvancedwellness.com/images/tools/tooth-chart.gif and both adult and children numbering/lettering here: http://www.toothiq.com/dental-glossary/dental-definition-tooth-numbering-systems.html ISO system: Two digits represent each tooth. The first digit indicates the quadrant (1=adult upper right, 2=adult upper left, 3=adult lower left, 4=adult lower right; similarly 5-8 are the same quadrants in the same order for child teeth). The second digit represents the tooth within that quadrant (1=central incisor, 2=lateral incisors, 3=canines, 4=1st premolars, 5=second premolars, 6=1st molars, 7=2nd molars, 8=3rd molars).
What is formula for pitch circle diameter?
(Using metric system) > You need the module (Essentially the tooth size) and number of teeth. > PCD = module * number of teeth
Why is the tooth decay considered a digestive system problem?
Your teeth are part of your digestive system. Tooth decay weakens a tooth and affects the way a person bites and chews food.
Where do the numbering of teeth start in the mouth?
See the Related link below for a diagram showing the locations and numbers of each tooth.
Is tooth number 16 a molar?
Yes indeed. It is the third molar (wisdom tooth)
Are PC laptop blue-tooth adapters brand specific or are they interchangeable?
i have one , and its universal. so they all should be . . . in theory
