answersLogoWhite

0


Best Answer

Yes.

They both have the same units, and 0.4 is greater than 0.2.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Is 0.40 meter greater than 0.20 meter?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the valve clearance gap on a peugeot 206 1.1?

inlet 020, outlet 040


What is the difference between veneer and plywood?

Many Layers of Veneer make plywood. Veneer is solid wood and its only .020- .040 of an inch think.


What cid is a 350 Chevy bored to 4.0625?

Depending on the piston type you are running, you would bore .030, .060, .090. Or, .020, .040. At .030, you come out to 355. So, at .060, 360.


What is larger 0.38 or 0.40?

040 is larger than 0.38 is.


Octal equivalent for space?

In octal notation, the ASCII code for a space is 040. So, the octal equivalent for a space is simply 040.


What is different about a skeet barrell and a regular barrelon a shotgun?

Mainly the degree of choke, or constriction at the muzzle. a skeet choke is the smallest degree of constriction next to no choke at all (cylinder bore). Hunting shotguns may be full choke, modified, or some other combination. The greater the degree of constriction, the greater percentage of pellets kept in a small circle. Cylinder.000 in40%Skeet.005 in53%Improved Cylinder.010 in57%Modified.020 in67%Improved Modified.030 in73%Full choke.040 in75%


What is 643x1280?

The answer is 823 040.


What is the proper gap for a champion RN11YC4 spark plug?

Depends on usage, should be around .040 inchDepends on usage, should be around .040 inch


What is the Evaporative system monitor?

The EVAP system monitor checks for fuel vapor leaks by performing either a pressure or vacuum test on the fuel system. For 1996 through 1999 vehicles, the federal standard allows leaks up to the equivalent of a hole .040 inches in diameter in a fuel vapor hose or filler cap. For 2000 and newer vehicles, the leakage rate has been reduced to the equivalent of a .020 in. diameter hole, which is almost invisible to the naked eye but can be detected by the OBD II system. Finding these kinds of leaks can be very challenging. According to one expert, you can find a .040 in. leak with an ultrasonic leak detector but not a .020 in. leak. For such a small leak, you need a smoke or dye-type detector.


What is 040 of an inch equal in mm?

To convert from inches to mm, you must multiply by 25.4.


What percent is .040?

0.040 is 4%


How do you do level 29 on 40xescape?

040