The equation for the perimeter is: 2(L + W) = 88m ie L + W = 44m So that L = 44 - W Then area = L*W = 480 m2 is equivalents to (44 - W)*W = 480 Or W2 - 44W + 480 = 0 which gives W = 20 or W = 24 if W = 20 then L = 24 and if W = 24 the L = 20 However, since conventionally, L>W, L = 24m, W = 20m
If twelve is the same as a dozen, then twenty would be the same as score.
if something is same size, same shape means that it is congruent or symmetrical.
Same length, same width, same size, same shape
It depends on what you mean by "same". The same area? Yes, it can be. The same shape? Yes, it can be. The same are and shape, Yes, it can be.
There isn't a different in A36 steel and 44W steel grade 300w. The 44W is the Canadian version of America's A36. Both are a mild steel.
300w is mild steel plateIt is the same thing as 44W or A36 plateThe 300 refers to the material yield strength in MPa
44W is the Canadian version of America's A36. 44W is also listed as CSA-G40.21.Mechanical Properties 44W/300W:Tensile: 65 to 85 ksiYield: 44 ksi minElongation: 20% min in 8" 23% min in 2"Mechanical Properties A36:Tensile: 58 to 80 ksiYield: 36 ksi minElongation: 18% min in 8" 21% min in 2" (for plates wider than 24")
There may be no difference at all. In structural steel, 44W is a perfornamce rating (minimum yield strength 44,000psi). 1020 is steel chemistry (non-alloyed steel with 2.0% carbon). Quite often 44W is 1018 (1.8% carbon) or 1020 in composition. If your steel dealer is selling you 44W, ask about the composition.
Belo Horizonte
Não sei!
Belohorizonte
44W is the Canadian version of America's A36. 44W is also listed as CSA-G40.21. Mechanical Properties 44W/300W:Tensile: 65 to 85 ksiYield: 44 ksi minElongation: 20% min in 8" 23% min in 2" Mechanical Properties A36:Tensile: 58 to 80 ksiYield: 36 ksi minElongation: 18% min in 8" 21% min in 2" (for plates wider than 24")
Astm a-36
Will a xfx nvidia geforce 9600gt xxx edition graphics card work on 300w power supply
which swift code bkchcnbj 44w?
The only way to connect a 300W amplier to a 60W amplifier is in series. You would also need to carefully balance the inputs so that the two amplifiers would do exactly their assigned workload. Its not a good idea, however, because the distrortion from the 300W amp would likely overwhelm the capacity from the 60W unit. Besides, 60W is less than -6db difference from 300W. The human ear can only resolve differences of only +/- 3 db, so just ignire the 60W and go with the 300W. Any thing else is likely to wind up being the "distorted" noise that irritates us peace seakers.