Want this question answered?
First, you have to make sure you're measuring the right thing. Tilt isn't specific enough. You'll want to measure pitch and / or roll. Make sure your accelerometer is capable of measuring tilt. Read the datasheets carefully. For example, the ADXL322 is a 2-axis accelerometer which is capable of measuring tilt. The ADXL78 does not repeat NOT have this in the datasheet. You could try to use the 78, but it might not work at all. You must mount the accelerometer so that the sensitive edges are parallel to the ground. In other words, it has to be lying flat on its back. ("How flat?" It must be as flat as you want your accuracy to be. ) In such a configuration, the chip listed above will give pitch as pitch = arcsin( Ax / 1g) and roll as roll = arcsin( Ay / 1g ). Ax and Ay are the two outputs. Read the datasheet. (I can't stress this enough.) While you would usually put the - and + outputs into an instrumentation amplifier, the 322 chip listed above does not have such a thing. You would have to run it through some kind of gain circuit, and probably one with an adjustable gain and offset.
slope
It measures angle of a slope or tilt
trapezium or a parallelogram
It's called "Tilt", Axis tilt is the vertical angle at which the ball rotates. Also Axis tilt known as spin. Not to be confused with Axis "rotation" which is the horizontal measure of the angle of the ball's revolutions.
it don'tha
it don'tha
Inclinometers are also known as tilt meter, tilt indicator, slope alert, slope gauge, level gauge, level meter, and are used for the measurement of incline i.e. angle of slope (tilt), depression or elevation of an object in respect to gravity.
yes
The yellow, red, and blue dimand shaped things are the money in Temple Run. You just need to tilt your devise to pick them up.
to measure vertical movments-tilt meter to measure horizontil movments-creep meter
a creep meter measures vertical movement and a tilt meter measures horizontal movement. Hope my answer works for you thanks
No. Only the Intuos line has this feature.
to see anything if it is level johnathen aguon :) that is a very basic understanding. a tilt meter is used on volcanoes to identify any deformation due to pressure from magma build up. if the tilt meter says that the volcano has moved/bent under pressure, it means that the volcano is probably going to erupt. although, you would need to test the silicon and water levels if you wanted to know whether it would be explosive or not. rk
A tilt meter is often used on volcanoes. they measure the angle of the mountain/volcano. A basic tilt meter is a tub with some water in it and as the mountain gets taller the water moves this is marked. Most modern tilt meters are automatic and send the information my radio.
to see anything if it is level johnathen aguon :) that is a very basic understanding. a tilt meter is used on volcanoes to identify any deformation due to pressure from magma build up. if the tilt meter says that the volcano has moved/bent under pressure, it means that the volcano is probably going to erupt. although, you would need to test the silicon and water levels if you wanted to know whether it would be explosive or not. rk
First, you have to make sure you're measuring the right thing. Tilt isn't specific enough. You'll want to measure pitch and / or roll. Make sure your accelerometer is capable of measuring tilt. Read the datasheets carefully. For example, the ADXL322 is a 2-axis accelerometer which is capable of measuring tilt. The ADXL78 does not repeat NOT have this in the datasheet. You could try to use the 78, but it might not work at all. You must mount the accelerometer so that the sensitive edges are parallel to the ground. In other words, it has to be lying flat on its back. ("How flat?" It must be as flat as you want your accuracy to be. ) In such a configuration, the chip listed above will give pitch as pitch = arcsin( Ax / 1g) and roll as roll = arcsin( Ay / 1g ). Ax and Ay are the two outputs. Read the datasheet. (I can't stress this enough.) While you would usually put the - and + outputs into an instrumentation amplifier, the 322 chip listed above does not have such a thing. You would have to run it through some kind of gain circuit, and probably one with an adjustable gain and offset.