You can use the New Venture Gear 4500 ( mw3 ) to replace the 3500 ( mg5 )The 4500 was the same except for the first couple years when it had a lower granny gear (6.32 compared to 5.72 in the newer versions). You will need a bellhousing, but the smaller clutch you have in the 3500 should work. It will bolt up, you can even reuse the transfer case. The crossmember will stay in the same place. you will already have the hydraulic clutch setup but you will need the 4500 slave and master cylinder.
700r4
The recommended spark plug gap on a 1996 Chevy C1500 with a V8-305 engine is .060"
1996 chevy c1500 pick up 305 motor bolt torque spec intake manifold
Yes it does. I have a 96 geo tracker and it does have power steering.
i have a 1996 z71 my tranny bad in it i have a 1992 z71 tranny will it fix there both 4x4
About five.
I'm answering my own question here. I put the 1995 tranny on the 1996 and it works just fine. I just had to put an electronic piece from the 1996 tranny onto the 1995 tranny in order to get the wiring to work. Easy...and the car runs perfect on the 1995 tranny.
Recommended grade is 75W/90 synthetic.
to do what? if it is brakes you need 3/8" Allen
My 1996 is governed at 100 on the dot.
it cost 1500 dollars to replace my tranny at the local tranny shop
1-8-4-3-6-5-7-2