The trailer wires are not fused. If the corresponding lights e.i. right turn, left turn, park, or stop lights work on the vehicle, then the corresponding wires of the trailer harness should have power at the same time (have someone put their foot on the brake and the brake light wire will have 12 volts while the brake light of the vehicle are lit. Same with the turn signals). Remember that one of the wires is a ground and one is available for an auxiliary use.
the harness
that suburban to nice a truck to splicing wires pimpn get the wiring harness . play it safe nate dawgg do not want you to go up in smoke.
You can buy a speaker harness. An adapter that connect the positive and negative from the speaker into the stock harness.
Down grade the sensors.
It should be by or under the rear of the vehicle.
Connect the sunroof motor with the sunroof motor retaining bolts. Connect the sunroof linkage. Connect the wiring harness to the back of the sunroof motor.
Connect the wiring harness to the back of your 1995 Buick LeSabre stereo. Secure the stereo with the stereo retaining screws.
Under passenger headlight behind front bumper.
You have to buy the wiring harness for the new deck the connect the corresponding wires
Install the motherboard first. The drives will have wiring harness to connect to the motherboard.
there is no cable the trans is all electronic there will be a wiring harness to the trans but no cable.
No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.