1 cubic meter of pure water weighs 1 metric tonne.
One ton of plain water has a volume of about 32 cubic feet.
1Y=12Incd=30.48cm
1 Cubic Yard=30.48x30.48x30.48=28316.85cc
Density of water- 1gm/cc
Weight of 1 cub yard of water=28316.85gm=28.31685Kg.
One tonne of what? A tonne of feathers would take up more space than a tonne of lead.
This depends on the density of concrete; for a density of 150 lb/ft3 the volume is 14,7 ft3.
Approx 1.4T
1 cubic yard = ~1.35 tons Therefore, 1 ton = 0.7407 cubic yards.
None, since there can be no conversion.A ton is a measure of mass. A cubic yard is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. If you are not convinced, consider a cubic yard of air. How many tons? Next consider a cubic yard of lead. How many tons?The masses of equal volumes of the two substances will clearly be very different. So there is no direct conversion between mass and volume: you need to know the density of the substance to enable you to carry out the conversion.
1 cubic yard = 27 cubic feet 1 cubic foot = 0.037 cubic yard (rounded)
This depends on many factors.
as a rule of thumb, 1 cubic yard of concrete weighs about 4,000lbs or 2 short tons
8
1.6 tons
There is approximately 1. 35 tons in a cubic yard of fine sand.
the answer is about 1.18 short tons. the answer is about 1.18 short tons.
Approximately, plus or minus. (rounded)
The answer depends upon the material to which you are referring too. A cubic yard of compressed cotton is obviously going to weigh less than a cubic yard of steel.
1.5 to 1.65 tons per CY.
It depends what kind of waste it is. A cubic yard of soil is aprox. 1 ton.
One cubic yard of broken limestone weighs about 1.3 tons. One cubic yard of pulverized limestone weighs about 1.17 tons.
Multiply tons by 1,529.11 to get pounds per cubic yard:* 3.3 x 1,529.11 = 5,046.063 pounds per cubic yard
No where near 1 ton.