A micrometer is more accurate but it is only suitable for very small objects. For example, you could not measure the length of a credit card to any degree of accuracy using a standard micrometer.
Takes some skill to use a vernier! So can't say, will depend on your skill level! By micrometer caliper You meen dial type caliper! A micrometer and a caliper are apples and Oranges
vernier scale zero and main scale zero are not coincide with each other means, the instrument has zero error.
They do come in different sizes, with about 150-200 mm being very common.
ans nahin pata to site band kar do pls
0.0001
0,000635 mm
0.01mm
on the very top of the burette. Should start from zero to 100mL on the burette
If a vernier caliper has zero reading of 0.025 cm and the caliper reads 5.565 cm what should be the correct reading? 5.565 - 0.025 = 5.54 so caliper reads 5.54 cm If the zero reading on the vernier calipers is -0.025 cm with the reading still 5.565cm, it is 5.565 - (-0.025) = 5.565 + 0.025 = 5.59 cm
accuracy in mm and inches
If the caliper is properly calibrated, then neither system is more accurate. Accuracy depends on the quality of the measuring, not the unit used.
there is a big different between the vernier caliper and micro meter caliper,the vernier caliper they can use the outside and inside measurement while the micro meter caliper it's just only use outside measurement..
A Vernier caliper is quite accurate and idiot proof. Part of its accuracy lies in its general ease of use.
on the very top of the burette. Should start from zero to 100mL on the burette
where on the vernier caliper would you read to obtain the vernier scale reading
If a vernier caliper has zero reading of 0.025 cm and the caliper reads 5.565 cm what should be the correct reading? 5.565 - 0.025 = 5.54 so caliper reads 5.54 cm If the zero reading on the vernier calipers is -0.025 cm with the reading still 5.565cm, it is 5.565 - (-0.025) = 5.565 + 0.025 = 5.59 cm
It is less than a micrometer but greater than a non vernier caliper or ruler.
It is less than a micrometer but greater than a non vernier caliper or ruler.
No unit for vernier scale coincidence. But as we multiply it by least count which has unit then we get vernier scale reading with the same unit. Of course main scale reading and vernier scale reading would have the same unit
Vernier caliper has an accuracy of 0.01 cm. But screw gauge has still more. It will be able to give even 0.001 cm. So even third decimal could be got accurately when we use screw gauge instead vernier caliper.
Find the marks that line up exactly (or as exactly as possible and then interpolate). see the Sources and related links below for a page and a video explaining in detail.
Vernier calipers are used to measure length when quite accurate measurement is required, but not such accuracy as to require a micrometer.
You can measure distances of around 10-12 centimetres to an accuracy of 0.1 millimetres.
The vernier calipers is used to measure length of small objects to an accuracy of 0.01 centimeters.