answersLogoWhite

0


Best Answer
Copy

Formula: r2 x Pi x length (where r = radius and Pi = about 3.1416)

  • Example: A 50-foot long pipe with an inside radius (1/2 the diameter) of three feet - 32 x 3.1416 x 50 = about 1,413.72 cubic feet of volume
User Avatar

Wiki User

โˆ™ 2010-07-04 12:59:19
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Add your answer:

Earn +5 pts
Q: The sample of calculation of volume in a pipe?
Write your answer...
Submit

Related Questions

If a rock sample has a mass of 250g and a volume of 45 cm3 show the calculation for the density of the rock sample?

density = mass/volume = 250g/45cm3 = 5.6g/cm3 (rounded to 2 sig figs)


How is mass divided by volume done?

This formula is used in the calculation for density, Density=mass/volume,normally in the calculation of liquid volume or density.


What is the volume of a Pipe whose radius is 55mm and pipe length 3000mm?

The volume of this pipe is 28,510,000 mm3


What property like volume depends of the size of the sample?

The volume and the mass of sample both depend on the size of the sample.A small sample has small volume and small mass, a big sample has big volumeand big mass. But the ratio of mass to volume is constant for a pure sample ofa substance, no matter what size the sample is. That ratio is called the densityof the substance.


How do you calculate volume of pipe in meters?

The volume of a pipe is calculated by multiplying Pi by the square of the radius by the length of the pipe.


The volume of a sample of water is 20cm3 the mass of?

The volume of a sample of water is 20 cm3. The mass of this sample is closest to


How much volume is there in a pipe that is 0.09 m in diameter and the pipe is 0.060 km long?

The volume of this pipe would be 0.3817 m3


How can you find the size of a pipe by internal diameter outer diameter and length?

The internal diameter of the pipe times pi times its length will yield the volume it can contain. The outer diameter of the pipe times pi times its length will yield the volume that the pipe will displace when it is submerged or buried. The volume the pipe will displace minus the volume it will contain will yield the volume of material that makes up the pipe.


How can you find the volume of water in a pipe in liters?

calculate the volume in centimeters and then convert 1000 cubic centimeters to a liter. Liters Volume of a Pipe = Length Pipe(cent.) *PI*radius Pipe (cent.) squared/1000


Procedure for calculating density of graphite?

For experimental calculation: Mass the graphite sample with a scale (make sure to take into account the mass of whatever is holding the graphite sample - either zero the scale with the beaker/holder before adding the sample or subtract the mass of the beaker/holder from the total mass). Measure volume by measuring water displacement when graphite sample is added to a measured amount of water. Density = (Mass) / (Volume)


The diameter of a construction pipe is 7 ft If the pipe is 30 ft long. What is its volume?

The volume of the pipe is 1,154.5 cubic feet.


Why is density used to identify substances instead of mass or volume?

Mass and volume are extensive properties, which are dependent upon the size of the sample. A larger sample will have a greater mass and volume than a smaller sample. Density is an intensive property, which does not depend on the size of the sample. Density is a ratio of mass to volume, which does not vary with the size of the sample. The density of a larger sample will be the same as the density of a smaller sample.


What is the volume of 1 meter of 15mm pipe?

The volume of 1 meter of 15mm pipe is: 176,710 mm3


How much volume is in 3000 ft of 4 inch pipe?

The volume of this pipe is 261.8 cubic feet.


How do you calculate volume of water in a pipe?

measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe


What is the mass of a sample divided by its volume?

That's the density of the sample.


The mass of a sample divided by its volume?

That's the density of the sample.


What is the formula for finding the volume of a pipe?

pi*r^2*hThe volume of the pipe is the product of its Area and Height.


A four inch pipe carry how much more volume than a 2 inch pipe?

It is based on the flow area, which is proportional to the square of the diameter. 2 squared = 4. 4 squared = 16. So, the 4 inch pipe can take 16/4 = 4 times the volume of the 2 inch pipe. It might be less confusing if you had picked sizes other than 2 and 4. This is a rough calculation, since pipe inside diameters are not the same as nominal sizes, but close enough for most purposes.


The ratio of mass to volume of a substance?

The ratio of a mass to the volume of a large sample in which the massis homogeneously dispersed is known as the concentration.But the ratio of the mass of a whole sample to the volumeof the whole sample is the density of the substance.


How much liquid in 15 foot 6 inch diameter pipe?

The volume of a cylindrical piece of pipe is its cross-sectional area times its length. For a 15' = 180" long piece of 6" diameter = 3" radius pipe: volume = {pi}r2h ~= 3.14 x 32 x 180 ~= 5089cu in. ~= 2.95 cu ft. (Remember to convert to one unit (feet or inches) for the calculation.)


Which type of stoichiometric calculation does not require the use of molar mass?

Volume-volume promblems


Volume of a 28-inch diameter pipe with a length of 12718 meters?

-12690


Volume of 12 in by 12 in pipe?

The volume of a 12 inch x 12 inch pipe is: 1,360 cubic inches


What is the volume of 1 meter of 6 inch pipe?

The volume of this pipe is 1,113 cubic inches or 0.644 cubic feet.