0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the meaning of transformer vector group YNa0d1?
The critical information here is bolded, as follows: YNa0d1.The upper-case Y indicates that the higher-voltage windings are connected in wye (or 'star'). The upper case letter N indicates an accessible neutral connection on the high-voltage side.The lower-case 'a0' indicates an autotransformerwith an angular displacement of 0 degrees.The lower-case d indicates that an auxiliary lower-voltage winding connected in delta (or 'mesh').The numeral 1 is a multiplier of 30 degrees, and indicates the transformer connection's angular displacement(or 'phase displacement'). Angular displacement is expressed in multiples of 30 degrees, starting from 0 degrees.So this is a wye-connected autotransformer having an angular displacement of 0 degrees with a delta-connected auxiliary winding having an angular displacement of 30 degrees.
Is chisel a electrical hand tool?
Chisels are almost always a static hand tool, or a pneumatic one. I suppose electric is possible, but haven't seen one yet.
If You're Touching A Counter With My Left Hand And You Get Shocked With Your Right Hand Will The Electricity Travel To Your Left Hand If It's The Quickest Route To The Ground?
Most of the electric current will pass through the path through the body which offers the least resistance, NOT the 'quickest' path, as speed doesn't come into it.
What is the shape of the magnetic field that surrounds a current carrying wire?
The shape of the magnetic field created by current flow in a wire will be circular around the wire. The magnetic lines of force "surround" or "wrap around" the wire according to the left hand rule. Grab the wire with your left hand with your thumb extended and pointing in the direction the electrons are flowing. The fingers will be wrapping around the wire in the direction of the magnetic field. Look at the wire "head on" and picture the electrons "coming at you" as you look. The magnetic lines of force will circle around the wire in a clockwise direction. Grab the wire with your left hand as you look "into" that wire and look at your fingers. Clockwise. The magnetic lines of force "circle" the conductor in closed rings. temptress_skkk: In my textbook, it says the "right-hand rule" instead of the "left-hand rule" but it's basically the same thing, only the current is going the opposite way with your right hand instead of your left hand being in its place. it is the right hand rule of thumb not the left hand. and the magnetics line will fade as the square of the distance.
Why high voltage line workers keep left hand in pocket?
If you touch a power line with one hand, the current goes through your body. If you touch it with two hands, the current goes through your heart. They keep one hand in their pocket to prevent touching the line with both hands.
A hand-operated conduit bender with a shoe for bending 1-inch EMT can also be used to bend?
1/2 inch emt
Using 12 inch EMT and a hand bender you want to make a bend with a 14 inch stub up How far from the end of the conduit should you put the mark that will line up with the bender arrow?
1/4"
What in your hand indicates contrition or humility?
Cap in hand
In futurama how many fingers does the robot called bender have on each hand?
3, at least in the episode I'm watching right now (the one where he wrestles as the Gender Bender).
How does conduction travels?
a solid touches another hot solid like your hand touching a hot pan
What is a typical hand sewing needle made of?
Steel.
What percentage of the bones in your body can you find in your hand?
Quick research indicates 13.1%
What is a typical trait you can earn at a vocational school?
Good hand-eye coordination
What are some hand gestures in Portugal?
If you run while holding your butt, it indicates that you have to use the restroom. If you slam your head against a wall or hard surface, it indicates that you are confident in what you are doing. If you lick your hand and wipe it on somebody's face, it shows respect.
What is the speed of a clock hand?
The speed of a clock hand depends on what the clock hand indicates the second hand is 2pi per 60seconds, the minute hand is 2pi per 3600 seconds and the hour hand is 2pi per 216000 seconds.
How can you test a rigid steel conduit system being used as an equipment ground conductor to ensure the conduit will be able to carry sufficient ground fault current?
No test is needed. The conduit sizes are laid out in the electrical code book. It states the current carrying capacity of each of the conduit sizes. These test were done by an underwriters test laboratory and approved to carry the stated current capacities. Where the trouble might arise is with the workmanship of the installation. An example, when threads in electrical conduit are involved wrenches must be used not just hand tight, The same thing goes with lock rings, hammer them on not just finger tight. The metallic conduit system needs to be tight to work. There are new code changes coming down the line that will state that a ground wire will have to be pulled along with the feeder wires in a metallic conduit system.
What is the typical way to say farewell using hand gestures?
The typical way to say farewell using hand gestures would be to wave one hand from side to side with the palm raised and pointing towards the other person. Another common method would be simply to raise the hand in the same way but without waving.
