Height and diameter will give you the volume, if you know the density you can then calculate weight from that.
the diameter increases as the height is increased
if you are given the circle's "height" then that is the diameter. the diameter is twice the length of the radius, so divide the height by two and you will get the radius.
6 foot to 6 foot 1.I would like to know your source for this info. Uncertain without calculation and many major leagues exagerate player height and weight
A can's diameter is 3 inches, and its height is 8 inches. What is the volume of the can?
It does affect the diameter. At a high height the diameter gets bigger. At a low height the diameter is slower.
Are you the right weight for your height? It's important to know if you're the right weight for your height. This can be done by calculatating your BMI.
Engineering requires calculation of the dish end diameter and circumference for proper fit before crimping. The weight can also be necessary in some applications. To determine the weight, knowing the substance and dimension, going to weight of unit of substance the calculation can be determined.
It depends on your height. Use a BMI calculation as a starting point.
A sphere's height will always be the same as its diameter.
A 60 liter drum typically has an inner diameter of 380 mm and an outer diameter of 395 mm. The height is 575 mm, and the weight is 4,1 kg. In US measurements the inner diameter is 14.96 inches, the outer is 15.55 inches, and the height is 22.64 inches. The weight is 9.04 pounds.
No you are not overweight. That is an average weight measurement for someone of your height and age. According to the BMI calculation by the CDC, that is a healthy weight.
There is a simple calculation, slightly different between males and females, that can estimate a person's blood volume. However, the calculation requires both weight and height, and is referred to as Nadler's Formula.
The calculation of what? The gross weight? The curb weight?
Height and weight varies from person to person depends upon their race, heredity, food habits etc. If u want to know that you are in corect height and weight means , try BMI calculation. BMI=height in metre square/ weight in kg.. If your calculated value is in between the value of 18.5 to 24.5 you are healthy and normal, if it is below 18.5 you are under weight, if it is above 25 you are overweight,
Top diameter at 1.75" and the height at 2.25"
Body Mass Index It is the ratio of Height to Weight Calculation: (Weight in pounds/{height in inches} x {height in inches}) x 703 or (weight in kilograms/{height in meters} x {height in meters}) Underweight: 40
If it is square in shape then the calculation is that of a cube "length x width x height. If it is round in shape then the calculation is that of a tube or cylinder "pi x r squared x height. Pi is 3.142 and r is half the diameter. It is the easiest to measure using centimeters as 1000 cubic centimeters is 1 litre.