0
A rather thin copper or aluminum wire.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How big is 6 gauge wire?
The size of the wire is stated by its gauge under American Wire Gauge. Six gauge wire is size 6 AWG.
How do you measure the gauge of number 8 wire?
A well stocked metal work shop should have a wire guage as should your local hardware store
What is the diameter of 16 gauge wire?
16-gauge wire has a diameter of 0.05082 inches.
Which gauge wire is a 12v?
The gauge of wire that is 12 volt is 18, 14, and 16.
What is the maximum breaker size for these gauges wire?
You listed no gauge wire. This is the required breakers.14 gauge - 15 amp12 gauge - 20 amp10 gauge - 30 amp8 gauge - 40 amp
What is 6 gauge?
A thickness of wire or metal.
What is thicker 12 gauge or 18 gauge steel?
The lower the gauge the heavier, sheet metal, wire & shotguns...
What is thicker 28 or 30 gauge?
The thickness of metal wire is inversely proportional to the guage number of the metal wire. So 28 guage metal wire is thicker than 30 guage metal wire.
Which is thicker 12 gauge or 20 gauge?
12 gauge is thicker than 20 gauge. The lower the gauge, the thicker the sheet metal or wire.
What is Birmingham wire gauge?
It was a system used to specify the thickness or diameter of metal wire. It was improved and renamed British Standard Wire Gauge in 1883, usually abbreviated to SWG.
What is the thickness of a 9 gauge wire?
3 gauge metal plate is approximately 1/4 inchthick.
How big is gauge?
It depends on whether you are referring to sheet metal, wire or a shotgun. For sheet metal, 20 gauge is a thickness of 0.0359 inches (steel), 0.0396 inches (galvanized steel) or 0.0320 (aluminum). In American Wire Gauge (AWG), a 20 gauge wire is 0.032 inches (0.813mm) in diameter. A 20-gauge shotgun is a caliber of 0.615 inches (15.621mm).
How big is 20 gauge?
It depends on whether you are referring to sheet metal, wire or a shotgun. For sheet metal, 20 gauge is a thickness of 0.0359 inches (steel), 0.0396 inches (galvanized steel) or 0.0320 (aluminum). In American Wire Gauge (AWG), a 20 gauge wire is 0.032 inches (0.813mm) in diameter. A 20-gauge shotgun is a caliber of 0.615 inches (15.621mm).
1 micron is how much gauge?
Metal, wire, needles, shotgun bore? What kind of "gauge?" How many kittens in a rainbow?
Is twentytwo thirtieths greater than twentytwo thirtysecondths?
Yes.
Can you use 14-3 wire to power metal halide light outside?
The question isn't what you're powering with a particular gauge of wire, but what's the current draw. If the metal halide light can run on a 15 Amp breaker (from the breaker panel), fine use your metal halide in your residential application and run it on the 14 gauge wire.
How thick is 16 gauge?
16 gauge what? Wire... sheet metal... shotgun? No, seriously; look up a guage thickness chart for the material in question.
