0
If you are referring to domestic electrical outlets, most regions use either 110 - 120 volts or 230 - 240 volts.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Does a standard multimeter measure ac in peak or peak to peak?
Neither. A.C. voltage, and current, are expressed as root-mean-square (rms) values, and this is what a voltmeter and an ammeter reading will indicate. To measure peak voltage, or peak-to-peak voltage, you will need to use an oscilloscope.
What is the effect on the voltage gain of the circuit if different frequency values were to be used?
== ==
Can you calibrate voltmeter on multimeter or multimeter on voltmeter?
how which is right and which is wrong. You need a voltage standard with that you can calibrate both to the standard
What is meaning oof rated values of current voltage power and torque of an electrical machine?
What it means is that those rated values may not be exceeded, they are the maximum that the machine can take.
What range of values does intrinsic standoff ratio fall into?
The ratio of RB1 to RBBO is the intrinsic standoff ratio. It is the standoff voltage ratio to the power supply voltage.
What is the significance of negative values of voltage and current?
What is the significance of negative values of voltage and current?Negative values show direction and that is the significance
What is the voltage of electricity?
It depends upon which country you live in. There are two standard voltage ranges used 1) 220 to 240 volts and 2) 100 to 127 volts. In both cases the voltage is alternating and the values stated above represent the "root mean square" (RMS) voltage. The actual peak voltage will be greater than the RMS values by a factor of the square root of 2 (approx 1.4 times greater).
What is the voltage of household electricity?
It depends upon which country you live in. There are two standard voltage ranges used 1) 220 to 240 volts and 2) 100 to 127 volts. In both cases the voltage is alternating and the values stated above represent the "root mean square" (RMS) voltage. The actual peak voltage will be greater than the RMS values by a factor of the square root of 2 (approx 1.4 times greater).
What is the voltage tolerance of a standard electric motor?
the voltage tolerance of a standard electric motor is
What is the standard mains voltage in Dublin?
The standard voltage is the Republic of Ireland is 220 VAC at 50Hz.
Does a standard multimeter measure ac in peak or peak to peak?
Neither. A.C. voltage, and current, are expressed as root-mean-square (rms) values, and this is what a voltmeter and an ammeter reading will indicate. To measure peak voltage, or peak-to-peak voltage, you will need to use an oscilloscope.
What are the relationship between values goals and standard?
Relationship between values goals and standard
Why is a voltmeter used rather than a potentiometer?
A potentiometer is a variable resistor, while a voltmeter is a device that measures voltage.
What is the standard unite for voltage?
volt
What is the standard voltage of a laptop charger?
the voltage of a laptop charger is in between fifteen to twenty four voltage.
Carbon resistors are not available in market of each number of resistance why?
carbon resistors of standard values are manufactured because other values can be obtained by series and parallel combination of standard values. Moreover even standard values do not offer exact Resistance's will have tolerance
What is nominal line voltage?
'Nominal' means 'named'. So a 'nominal' voltage is the named voltage of a system. For example, when we talk about a 120-V or 240-V system, we are describing their nominal values, not their actual values which can change from moment to moment.
