Want this question answered?
(4 times the square root of 'A') centimeters.
Find the wire from the secondary of the transformer. If it's a step-down transformer the thicker wire is the secondary. Measure its diameter in inches and calculate its cross-section area in square inches. The current rating for transformer wire is 1000 amps per square inch, or 1.55 amps per square mm.
The question is fascinating. It would stimulate even more intense curiosity, I'm sure, if it included some numbers.
It is approx 0.003068 square inches.
A square has four sides of equal length,so 560 / 4 = 140 so eachside of the square is 140m long.140 + 140 + 140 + 140 = 560
You can't. Oakley has discontinued making them and have no parts for the original half wire models. Oakley 800-403-7449
I had a pair of Oakley E wire sunglasses (since lost them), purchased about 10 yrs ago, and they were very comfortable and robust to damage. The lenses were oval shaped and gave an overall sleek looking profile. They were the first version of these glasses to be sold and I find them to be better looking than the current version on the market. I would recommend them to anyone looking for a sporty pair of shades in a market sadly saturated with uber-retro aviator or dinner-plate sized shades.
There are many good locations to purchase Oakley Half wire glasses. One of the most affordable spots is the online website eBay, since they are sold used.
...will depend on the dimensions of and tension in the wire.
(4 times the square root of 'A') centimeters.
No. If you leave some copper wire in a square box it will never come out in a square shape.
I did the following... step by step, if you have any questions, please ask. - I placed the sunglasses perpendicular to me. One if the lenses will be close to you, while the other should be farther away. -I grabbed the farthest lens from your body with both hands. Placing your left had on the left side and your right and on the right side. One had is on the bottom of the lens, while the other is on the top of the lens. It does not matter which hand is on the bottom or top. -I grabbed the top and bottom of the frame, pulling away from the lens. At the same time I pushed with my fingers (that should be on the inside of the lenses) and pressed the lens out (on the lens closest to the nose pieces). You will hear a very faint "pop" when the lens clears the frame. -Then slide the lens out by grabbing the part that is out of the frame that is close to the nose piece -To put the new ones in, position the sunglasses the same way and put the replacement lens in the sunglasses, starting with the edge near the ear pieces. -Pull the top and bottom of the frame out and push the replacement lens into place. If you have any questions, please ask. If I can clearify anywhere, let me know. Good luck.
A three-acre square will need 1,446 feet of wire for its perimeter.
enameled round aluminum wire enameled flat aluminum wire enameled square aluminum wire
Resistance of a wire is inversely proportional to the square of its radius.
Resistivity is a property of the material only, not of the dimensions of the wire. The resistance of a wire is the resistivity times the length divided by the cross-section area. So a long wire has more resistance, a thicker wire has less resistance, even if they are both made of copper with the same resistivity.
The area of Wire Cache Provincial Park is 500,000.0 square meters.