You can make 500 feet of shelving that's 2 feet wide and 1 inch thick,
but you'll need some more materials to assemble it with.
Square feet of a room is given by multiplying length by width. You may need to break the area into rectangles for irregular shaped rooms and add up the areas of the given rectangles. Wood flooring is usually sold by board feet, unless it is parquet tiles. Board feet is a unit based on volume, considering the thickness. For purposes of covering a given area, it is simpler to measure the length and width of the flooring (using the same units you calculated the desired area of coverage). That will give you the surface area of 1 board, which you can divide into your total square feet number to cover, giving you the number of boards to buy. Remember to account for wasted board, due to cutting boards to fit, allowing extra boards to make up for the area lost in pieces you are unable to use.
37.5 square feet.
board or boards
The question cannot be answered because the height of the shed has not been specified. Not does the question make clear how much of the sides, and of the roof, is made of wood.
It is equivalent to 12 feet of wood or 4 yards of wood
Board feet is a cubic measurement of wood. One board foot = 1 ft × 1 ft × 1 in.
5 1/3 Board Feet.
20
Wood is the natural resource used to make particle board. It is made by pressing and binding wood particles together using a synthetic resin.
Cubic board feet is not a term used in the lumber industry, but it's obvious that a cubic foot is a cube that is one foot on an edge. A board foot, which is a common term used in the lumber industry is a piece of wood that is twelve inches wide, one inch thick and one foot long. Ten board feet would be a board one inch thick, twelve inches wide and ten feet long. (And no, a board doesn't have to be 12 inches wide. If it's 6 inches wide and 2 inches thick and one foot long, there is still one board foot of material there.) To make a cubic foot of wood, one might take one board foot of wood (12"x12"x1") and put it down, then stack another eleven pieces just like it on top the first one. That's 12 pieces of wood that are 1" thick for a total of 12" in height, and which are 12"x12" (length and width) giving us a volume of wood that is 12"x12"x12" or one cubic foot.
Linear footage as referred to in wood or lumber is the length as you see it.For instance a 2 x 4 x 8, is 8 feet long. - In theoretical board feet this is actually 5.333 board feet or practically, 5.0 board feet. ( because a 2x4 is not really that dimension, but 1.5x3.5. )
Feather board is made of whole wood. If you need a feather board, you can buy it on our website at a very reasonable price.
In the UK we call it 'blockboard'
volume terminolagy for wood used in carpentry is by the Board Foot, 1 inch by 12 inches by 12 inches. voulume for firewood is measured by the cord, a full cord or Bush Cord is 128 cubic feet, normally represented by a pipe of wood 4 feet wide, 4 feet high and 8 feet long.
Particle board is a material that is used to make cheap wooden furniture. It looks like regular wood, but it is made from wood chips or sawdust.
That is somewhat vague. are you talking about engineered wood? such as plywood, OSB, and particle board?
wood (mainly chip board)