0
Amperage or Amps is a measure of is the flow rate of electrical current that is available.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is ammeter used for?
An ammeter measures the electrical current in something. A digital one is calibrated to display through the shunt and convert information from the analog model.
How do you measure the current through a circuit without intercepting the supply?
Add an ammeter in parralel with the circuit. An ammeter in parallel with a circuit to be measured will not measure any current. In fact, placing an ammeter in parallel will cause a short. The ammeter must be placed in series with the circuit to be measured. It should be noted that this technique only allows for small magnitudes of current to be measured. One should not try to measure more than 10 amps using this method. However, this is not the goal of the question asked. I am not 100% sure what "intercepting the supply" means but I think the person asking the question means without breaking the circuit? In this case one could use a clamp on ammeter. There are several varieties that can measure low currents and there are those that can measure 100s of amps.
How do you convert microamps to amps in a circuit?
Multiply by 1,000,000
What is the resistance of the circuit if the voltage is 230 volts and the current flowing is 5 amps?
The resistance of the circuit will be 46 ohms
Can you use32amp circuit for a 15amp appliance?
If it is a 32-amp circuit you can use any appliance that takes less than 32 amps. That includes a 15-amp appliance. All appliances fed from that circuit must use 32 amps or less in total.
What is the difference between amps and volt-amps?
Amps is a measure of current flowing in a circuit. Volt-Amps or (VA) is a measure of power and is equivalent to wattage for a pure resistive load.
Why do ammeters need to be part of the circuit?
To measure the amount of amps (A).
What are unit amps?
An "ampere" is a measure of the current in an electrical circuit.
What is the device for amps?
An electrical device may draw amps, but there is not a device that equates to amps. Amperes are the measure of current flow in a circuit.
What do you put into a circuit to measure current?
An Ammeter. It measures the current (or Amps).
How do you measur ampere?
You use an "amp gauge" to measure amps in an actual circuit. It is hooked in series with the load. It can be placed anywhere in the circuit as long as it is hooked in series. Mathematically, you have to know the resistance, or wattage and voltage of a circuit. Volts=amps*resistance or amps=volts/resistance, or resistance=volts/amps. Ohms law!
When designing an ammeter you must take into consideration what?
How well it can measure current in an electric circuit and up to how many amps will it need to measure.
How do you measure volts and amps?
Preferably with a multimeter. For amps you hook it up in series, for volts you hook it up in parallell. For Ohms, you'll need to have the item you want to measure separated fron the circuit.
How ammeter is connected in a circuit?
If you would like to measure amps, there are two ways. First, you can splice the wire you'd like to measure the amps of in half, and have the ammeter/multimeter test leads touch each of the wire's sides. Now the circuit will connect up again as if you never cut the cable, and you can measure amps. The easier way is to get a clamp meter, which has a large loop that you can clip cables through and it will measure amps through induction, so you don't have to cut any cables.
How do you measure volts amps and ohms?
Preferably with a multimeter. For amps you hook it up in series, for volts you hook it up in parallell. For Ohms, you'll need to have the item you want to measure separated fron the circuit.
How many amps equal 1 circuit?
80% of the rated circuit. 10 amp circuit is 8 amps, 20 amp circuit is 16 amps, etc.
How is a amp meter connected to measure dc amps?
An Ammeter is connected in series with the circuit that you want to make the measurement on.
