0
How do you change metric units?
Trever Windler
Wiki User
∙ 14y agoThat will have a lot to do with what the units are, but you're generally
going to be either multiplying or dividing by some power of 10.
Wiki User
∙ 8y agoIf you mean from one multiple to the next, you multiply or divide by 10.
Wiki User
∙ 15y agohow do you change decimal where it goes?
Add your answer:
Earn +20 pts
Is there a deadline for US conversion to the metric system?
No, there is no deadline. They will do it when all the old people who have grown up with the antiquated system, have died. ;D The US officially defined most measurements (inch, foot, etc.) in terms of metric units in 1893, and President Jimmy Carter pushed to move the US fully onto the metric system in the 1970's, but there has been public resistance to abandoning the traditional units, in spite of their more cumbersome relationships. The popularity of two-liter bottles of soft drinks are a rare success story in the introduction of metric units to the U.S.
Why does schools study the metric system?
to help you move further in life because in Canada people use the metric system and it would help to learn it
Give three advantages of the metric system over the English system of measurement?
One advantage is that it is based on 10 making it easy to move the decimal place over and when rounding. Another advantage is the that the rest of the world uses it so that we can all communicate in the language of the metric system. And lastly it has 3 units and prefixes so you just add the prefix necessary for the measurement you are looking at. The prefixes are kilo, hecto, deka, base units,deci,centi, and milli.
What are the four advantages to the American system of measurement?
The metric system is the international system of measurement. It was designed with several goals in mind. Neutral and universal Any laboratory can make a model of the base units. Starting with length, the meter was determined by the distance between two lines of latitude. This can be measured at any location on earth with the proper instruments. Once the length is established, a cube can be constructed that is 1/10 km on each edge. The volume of this cube is the liter. Everyone has access to water, so fill this cube with water and you have a kilogram of weight at 3.98 degrees celsius. Oh, yes, you also had to develop a thermometer by dividing the difference between water's freezing and boiling points into 100 equal parts. Decimal multiples The metric system is decimal. The next larger unit is always 10 times as large, the next smaller always 1/10 as large. You don't have to remember 12 inches to a foot, 3 feet to a yard, are there four pints in a quart or only two, etc. To convert, simply move the decimal point. Prefixes All derived units use a common set of prefixes for each multiple. "Kilo" means 1000 whether it is used both for mass (kilogram) or length (kilometre). A few units such as the tonne (megagram) and quintal (100 kilograms) survive from old units but have been rounded to metric. The prefixes which come from the Greek language (kilo, mega, giga) are multipliers and those with Latin origins (centi, milli) are divisors.Here are a number advantages of the metric system and its measures.Why is the metric system easier than Imperial? The most frequently given answers include:1…Because metric is simple and consistent. There is only one meter and one kilometer and one liter..Unlike the mile (3 miles, international mile, US Survey mile, nautical mile.) and two gallons (Imperial gallon and US gallon) metric is simple and less confusing, fewer errors, less cost.2…Because it dramatically reduces conversion factors in calculations. Less time doing calculations, fewer errors, less wastage in material and time, less cost.3…Because metric prefix's enable whole numbers only. Avoiding decimal fractions and missinteruptation and errors.4…Because metric offers units from very large to very small.5…Because metric dimensions are easier to divide by three.6…Because it has links between related measurements.7…Because it uses logical symbols.8..Because it is the only properly maintained system.9..Because practically everyone uses it. For more than 95% of the world population, the metric system is the customary system of units, and for more than half of the industrialized world, it has been for at least a century.AlsoI beleive that the metric system is better than Imperial measures because..The metric system is a system.The metric system is the only measurement method ever developed as a complete system. All previous attempts used random developments at different places, at different times, and for different purposes.The metric system is universal.The metric system has been gradually adopted by all of the world's people. Despite often-vigorous opposition, the metric system has always been successful.The metric system is coherent.Because the metric system was developed as a complete system, it was possible to design it so that it has an internal consistency. Its internal coherence means that if you learn one part of the metric system you can easily extend your knowledge to all other parts.The metric system is capable.All crafts, trades, and professions can successfully use the metric system. Although the structure of the metric system is quite simple, it can be used in every human activity.The metric system is equitable.The metric system is fair and just to all who use it.The metric system is simple.The metric system uses only 7 base units and 22 units with special names - 29 units in all. There are now only 20 old measures left that are non-SI units currently accepted for use with the International System.The metric system is supported.International treaties and research keep the metric system modern and forward looking.The metric system is fundamental.The metric system is the only system used internationally. It is now fundamental to all measurements, both old and new.The metric system is unique.The metric system is unique because: it was planned; it is decimal; it has prefixes; and it is human in scale. It is unique because there has never been a measuring system like it.The metric system is legal.Legislation in every country in the world supports the metric system. It is often the sole method of measurement recognised by governments. International agreements also support the metric system so that contracts written in metric units have validity across international borders.
What are the basic units of the metric system for volume?
Gallons
Is there a deadline for US conversion to the metric system?
No, there is no deadline. They will do it when all the old people who have grown up with the antiquated system, have died. ;D The US officially defined most measurements (inch, foot, etc.) in terms of metric units in 1893, and President Jimmy Carter pushed to move the US fully onto the metric system in the 1970's, but there has been public resistance to abandoning the traditional units, in spite of their more cumbersome relationships. The popularity of two-liter bottles of soft drinks are a rare success story in the introduction of metric units to the U.S.
About how far is 125 feet?
That depends on what units you want to convert 125 feet into. My guess is you want to move it into the metric system. 125 feet is 38.1 meters, or .0381 kilometers.
Why does schools study the metric system?
to help you move further in life because in Canada people use the metric system and it would help to learn it
Give three advantages of the metric system over the English system of measurement?
One advantage is that it is based on 10 making it easy to move the decimal place over and when rounding. Another advantage is the that the rest of the world uses it so that we can all communicate in the language of the metric system. And lastly it has 3 units and prefixes so you just add the prefix necessary for the measurement you are looking at. The prefixes are kilo, hecto, deka, base units,deci,centi, and milli.
To convert measurements in the metric syste you can move the decimal point left or right. Why does this work?
This is because the metric system and our number system are both based on powers of ten.
What are the four advantages to the American system of measurement?
The metric system is the international system of measurement. It was designed with several goals in mind. Neutral and universal Any laboratory can make a model of the base units. Starting with length, the meter was determined by the distance between two lines of latitude. This can be measured at any location on earth with the proper instruments. Once the length is established, a cube can be constructed that is 1/10 km on each edge. The volume of this cube is the liter. Everyone has access to water, so fill this cube with water and you have a kilogram of weight at 3.98 degrees celsius. Oh, yes, you also had to develop a thermometer by dividing the difference between water's freezing and boiling points into 100 equal parts. Decimal multiples The metric system is decimal. The next larger unit is always 10 times as large, the next smaller always 1/10 as large. You don't have to remember 12 inches to a foot, 3 feet to a yard, are there four pints in a quart or only two, etc. To convert, simply move the decimal point. Prefixes All derived units use a common set of prefixes for each multiple. "Kilo" means 1000 whether it is used both for mass (kilogram) or length (kilometre). A few units such as the tonne (megagram) and quintal (100 kilograms) survive from old units but have been rounded to metric. The prefixes which come from the Greek language (kilo, mega, giga) are multipliers and those with Latin origins (centi, milli) are divisors.Here are a number advantages of the metric system and its measures.Why is the metric system easier than Imperial? The most frequently given answers include:1…Because metric is simple and consistent. There is only one meter and one kilometer and one liter..Unlike the mile (3 miles, international mile, US Survey mile, nautical mile.) and two gallons (Imperial gallon and US gallon) metric is simple and less confusing, fewer errors, less cost.2…Because it dramatically reduces conversion factors in calculations. Less time doing calculations, fewer errors, less wastage in material and time, less cost.3…Because metric prefix's enable whole numbers only. Avoiding decimal fractions and missinteruptation and errors.4…Because metric offers units from very large to very small.5…Because metric dimensions are easier to divide by three.6…Because it has links between related measurements.7…Because it uses logical symbols.8..Because it is the only properly maintained system.9..Because practically everyone uses it. For more than 95% of the world population, the metric system is the customary system of units, and for more than half of the industrialized world, it has been for at least a century.AlsoI beleive that the metric system is better than Imperial measures because..The metric system is a system.The metric system is the only measurement method ever developed as a complete system. All previous attempts used random developments at different places, at different times, and for different purposes.The metric system is universal.The metric system has been gradually adopted by all of the world's people. Despite often-vigorous opposition, the metric system has always been successful.The metric system is coherent.Because the metric system was developed as a complete system, it was possible to design it so that it has an internal consistency. Its internal coherence means that if you learn one part of the metric system you can easily extend your knowledge to all other parts.The metric system is capable.All crafts, trades, and professions can successfully use the metric system. Although the structure of the metric system is quite simple, it can be used in every human activity.The metric system is equitable.The metric system is fair and just to all who use it.The metric system is simple.The metric system uses only 7 base units and 22 units with special names - 29 units in all. There are now only 20 old measures left that are non-SI units currently accepted for use with the International System.The metric system is supported.International treaties and research keep the metric system modern and forward looking.The metric system is fundamental.The metric system is the only system used internationally. It is now fundamental to all measurements, both old and new.The metric system is unique.The metric system is unique because: it was planned; it is decimal; it has prefixes; and it is human in scale. It is unique because there has never been a measuring system like it.The metric system is legal.Legislation in every country in the world supports the metric system. It is often the sole method of measurement recognised by governments. International agreements also support the metric system so that contracts written in metric units have validity across international borders.
When was the last attempt to officially move to the metric system?
In 1975, the United States passed the Metric Conversion Act. The legislation was meant to slowly transition its units of measurement from feet and pounds to meters and kilograms, bringing the US up to speed with the rest of the world. There was only one issue: the law was completely voluntary.
If ABCDE is translated 7 units to the right and 2 units up what will happen to the polygon?
It will move but won't change shape or size
How would you convert from one unit of measure to another in the metric system?
move the decimal point the the correct spot
How can you change cm to m?
convert it 1cm =1000m There is no conversion necessary, cm (Centimeters) are smaller units related to M (Meters) in the same Metric system. 100cm = 1M. The point is that you move over one decimal place when the name of the unit changes. So 10mm (Millimeters) = 1cm. 10cm = 1dm (Decimeter, but this is rarely used) 10dm (100cm) = 1M.
What are the basic units of the metric system for volume?
Gallons
What are some advantages that the metric system has over the imperial system?
The metric system has the advantage of base 10 conversion. There are 100 centimeters to a meter, 1000 milliliters to a liter, and 1000 grams to a kilogram. This means that so long as you are using Base 10 for your calculations, all you have to do to move a decimal point.
