kN = Kilo newtons. It's a measure of force. meter squared per meter is a type of acceleration, and force is a type of acceleration. So saying, for example, 5 kN ms-2 means that there's 5 kilo newtons of force at that area.
The abbreviation kN could be used to indicate kilonewtons. A newton is a unit of measurement used to describe the amount of force required to accelerate a mass of one kilogram at a rate of meter, per second, per second. Kilonewtons are used in rating fasteners and anchors to indicate the safe working parameters.
MG KN was created in 1933.
1 ton (force) = 9964.016 newtons = 9.964016 KN
15 kN = 15 x 1000 N = 15000 N
Those are incompatible units, in the sense that a newton is a unit of force, while a tonne is a unit of mass (equal to 1000 kilograms). On Earth, with a gravity of 9.8 meters per second squared, a mass of one ton has a weight of 9800 newton (or 9.8 kN). In other situations, the same mass of one ton will have a different weight.
Since 1 kilonewton equals 0.112 tons, 80 Kn is equal to 8.96 tons.
For every square metre (each side of the square is one metre long), there exists 1 kn.An answer extension.Pressure is force per unit area 1 kilonewton per square meter is therefore a force one 1000 newtons per square meter. 1kN per square meter is also the definition of 1 kPa (one kilopascal). One pascal is simply 1N/m2.
It basically means that the floor can carry a weight of 500 kilos(or about 1000 pounds) for each square meter.
224.8 pounds per kN at Earth's surface.
What does kn mean when stamped in gold
The abbreviation kN could be used to indicate kilonewtons. A newton is a unit of measurement used to describe the amount of force required to accelerate a mass of one kilogram at a rate of meter, per second, per second. Kilonewtons are used in rating fasteners and anchors to indicate the safe working parameters.
What is the weight of steel in one meter cube equal 78.5 kN
25 kg/m2 is a density of a toughened glass with 10 mm thick. If you want convert that measure into kN, then multiply by the factor "g" that is gravity (9.81 m/s2) and you get 25 x 9.81 = 245.25 kN/m2.
the standard is 101.325 kPa. one pascal (Pa) = 1 N/m2. so 101,325 N/m2 or 101.325 kN/m2.
The newton (symbol: N) is the SI unit of force. It is named after Sir Isaac Newton in recognition of his work on classical mechanics.A newton is the amount of force required to accelerate a body with a mass of one kilogram at a rate of one meter per second squared.1 A kilonewton would be a thousand of these units.1. http://en.wikipedia.org/wiki/Kilonewton
According to http://www.convertunits.com/info/psig 1 pascal is equal to 0.000145037738007 psig. Therefore 1.5kPa = 1500Pa 1500Pa * 0.000145037738007 = psig 1.5kPa = 0.2175566070105 psig
Based on E-M Strength (120 kn) 45 KN 70 KN 90 KN 120 KN 160 KN 210 KN 320 KN etc