answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What does 2.0 mil thickness look like?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the difference in gauge and mil when it comes to above ground swimming pool liners?

Gauge and mil refer to the thickness of the liner. To find the thickness when listed by gauge ask for the type of material and check for the converted value ( ie a 10 gauge liner may equate to perhaps a 0.14 inch thickness material , 8 gauge may be 0.12 inches etc ) The mil value usually refers to a millimeter thickness (ie 15 mil should be thicker than a 10 mil ) >KEEP IN MIND THAT THE MIL NUMBER IS NOT IN INCHES , so make sure what the mil value is given in millimeters or inches then you can compare the different thicknesses. If the pool dealer doesnt know the difference you may want to find another dealer


Which is better 20 mil or 30 mil?

20 mil is better, I guess.


What is the thickest gauge for pool liners?

Gauge is the equivalent of a "mil" which is "thousandths" of an inch.Hence, a 20-gauge pool liner would be 20-mil which is 20 thousandths of an inch or 0.020" = 0.02 inches. A 30-gauge liner would be 30-mils or 0.03 inches....Answermost above ground pools are 20 mil and in ground liners are usually 30 mil


What is the thickest gauge pool liner?

In Canada Inground liners are called 30 mil. The standard, much like a 2X4 peice of wood, is cheated to 28 mil but some manufacturers cheat more, 27 mil isn't uncommon and in some cases I've seen 25 mil. In the US most ingorund is sold as 20 mil and is actually 20 with little cheating (from what I know but I'm in Canada) Abovegound is worse. It's called 20 mil, some label the liners with their warenty (at 25 years) but make it sound like that's the thickness. What most liners are is actually a max of 16 mil. It's been a long time since I've seen one thicker then that. A lot of liners are 14 mil, I've seen imported liners as low as 12 mil sold as 20. When trying to compare aboveground liners, the easiest was to compare is to ask the weight of the liner.


Which is bigger 20 mil or 29 mil?

29 mil.


How thick is a coat of paint 20 mil?

One mil is a thousandth of an inch, 20 mils would be a 50th of an inch.


What was Johnny Dep's salary for Pirates of the Carabian?

10 mil for first 1. 20 mil for 2nd. and 55.2 mil for 3rd.


The thickness of a 20 cent NZ coin?

the thickness isnt imprtant!


How much is redman worth?

20 mil


How thick is 20 mil?

According to Answers.com, a mil is: "A unit of length equal to one thousandth (10-3) of an inch (0.0254 millimeter), used, for example, to specify the diameter of wire or the thickness of materials sold in sheets." So; 20 mil = 20 thousandths of an inch = 0.020 inches Or; 20 x 0.0254 millimeters = 0.508 millimeters = 0.05 cm But... According to another source there is more to the story: "All papers are measured in two ways. One is referred to as the paper weight, the other is the actual thickness of the paper. Paper weight is generally measured in 'grams per square meter' (gsm). Paper thickness is measured in 'mils' which is short for thousandths of an inch. Paper weight and paper thickness often go hand in hand, BUT because some papers are denser than others they may be heavier than a similar thickness paper. For example, two manufacturers may list a weight of 300gsm, but the papers may have a different thickness because they have different densities. Paper thickness is generally listed as 10mil or 15.5mil and this is equivalent to .010 inches or .0155 inches respectively. To give this some perspective, a human hair is only 2 mils. This is measured with a digital micrometer." This from: http://support.colorvision.ch/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=178


What is 020 thickness?

20 thousandths


What does the capsules look like?

What does the 20 mg Omeprazole look like