open switch symbol
Simply put, the straight line is the on, and the circle is the off. These symbols represent an electrical circuit. The Straight line represents a closed circuit, which means the switch is on and the electric current can travel through it, and the circle means and open circuit, where the current cannot travel because the circuit is open. A quick trick to remember: "O, Open, Off".
Open to the right. Like the sign for a proper subset, or a rounded version of the less than symbol, <.
It looks like an envelope with the flap wide open.
have you ever used a phone? buy a cheep one and crack it open...
A squashed open box? Alternatively, a right-angle trapezium: ............................ .-------------....... .|..................\...... .|...................\..... .|....................\.... .|......................\.. .-----------------. ............................
---o-----o----- is a closed switch / / ---------o o------ is an open switch
Answer:It has a small computer system in it that helps it open.
Scroll down to related links and look at "Ohm symbol - Google images".
Diode symbols look like open triangles with horizontal lines extending from either side. There will be a vertical line at the tip of the triangle that may have turned ends depending upon the type of diode.
Look at this link http://www.rason.org/Projects/transwit/transwit.htm
When a circuit is in off condition then it is called an open circuit..
You mean something like this: So your name is?
If the switch is open, current does not flow.
open your hood on the drivers side there is a fuse box open it up the look at the pic it will show you which on it is
child locks check owners manual for location of override switch... open front door look for switch on a or b piller
open the hood and look for it
Sounds like the switch that attches to the brake pedal is not disconnecting. Look up under the dash and look where there is a device that moves when you move the pedal in and out. That should be your brake light activation switch. When you depress the pedal the switch makes contact and the brake lights come on, when you leave off the pedal the switch should open breakign the circuit. Look at the switch and see if it needs adjusted or if the switch is bad and will not disconnect thus completing the circuit makign the lights stay on