0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many microns is equal to 1 Ra?
4 micron
Ra equals 0.8 µm?
Ra is the roughness of the surface used in engineering. Mu(greek letter)metres is one millionth of a metre. To put in perspective glass would be around Ra 0.1, polished chrome plating would be around Ra 0.3 so Ra 0.8 is still fairly smooth but a dull finish. You would just be able to feel the surface with your fingernail.
Which is rougher 15 Ra or 20 Ra Ra is Roughness average a term used in passivation?
20 ra is worse
How do you convert Ra Value To Rz Value?
what do you mean by Ra and Rz values
Two metallic wires A and B are connected in parallel combinationWire A has length 'l' and radius 'r'Wire B has length '2l' and radius '2r'Commute the ratio of total resistance of parallel combination?
FOR WIRE A , RA = rho L/A = rho L/pie* r square -equation 1 RB = rho 2L/pie(2r)square = rho 2L/4 pie*r square =rho L/2 pie * r square -equation 2 RA/RB = rho L/pie * r square * 2 pie *r square/rho L RA/RB = 2 RA = 2RB , RB = RA/2 1/Rp = 1/RA + 1/RB =1/RA +1/RB 1/Rp = 3/RA Rp/RA = 1/3 Hence the ratio is 1:3
What is ra and rz surface finish?
what is Rz and Ra urface finish?
How many microns is equal to 1 Ra?
4 micron
Where is Ra's Al Ghul on Lego Batman for the Nintendo DSi?
if you finish all the levels when your a super hero you get to do villan levels and you can pick ra`s al ghul
How do you get ra's al gul in Lego batman?
you finish the game 100% including minikits and all
How many moles in 987 grams of Ra(OH)2?
987 grams of Ra(OH)2 is equal to 3,78 moles.
What meaniningSurface roughness Ra 3.2 value?
Ra 3.2 basically mean the surfaces must be machined to a tolerance of 3.2micro metres > Ra 3.2 would mean a standard finish on a lathe or miller ie not a deliberate finishing (slow speed) cut.
Ra equals 0.8 µm?
Ra is the roughness of the surface used in engineering. Mu(greek letter)metres is one millionth of a metre. To put in perspective glass would be around Ra 0.1, polished chrome plating would be around Ra 0.3 so Ra 0.8 is still fairly smooth but a dull finish. You would just be able to feel the surface with your fingernail.
What is the attack number of the wing dragon of raw?
Firstly..it's spelt ra..and seondly...ra's attack points are equal to the combined total of the three monster used to truibute. You can decrease your lifpoints to one, and give the rest to ra, and you can truibute monster to give ra their attack points.
What is is NOT a public work that was built during Pax Romana?
ra ra ra ra ra ra ra ra ra ra ra ra ra cheater cheater cheater cheater cheater cheater cheater cheater cheater cheater cheater cheater ra ra ra ra ra ra ra ra ra ra ra ha ha ha ha ha ha ha ha ah ah ah ah ah ar ar ar ar ra ra ra ra ra t(._.t)
How many years would you need to attend a nursing school in Green Bay in order to get your basic RA?
Getting your basic RA is the first step in starting your career as a nurse. This program in Green Bay will take 2 years in order to start and finish this basic RA. This would then lead to getting your advanced nursing degree.
How do you polish aluminum to get a surface finish with a rating of 0.2 Ra?
RUB DOWN WITH 1200 GRADE WET AND DRY THEN IF ALLOWED POLISH UP WITH BRASSO.
Is the number of monsters you use to summon The Winged Dragon of Ra multiplied by 1000?
Ra's attack and defence is equal to the combined attack and defence of the monsters tributed for its summon. You can also tribute other monsters to increase Ra's attack and defence by that monster. When Ra is summoned from the graveyard (monster reborn etc.) it has 0 attack and defence as no monsters were tributed for it
