Watts= Volts x Amps
The formula is (n-2)x180 over n =x
It is a simple 'difference' formula. Altitude at 'a' altitude at 'b' Take 'a' from 'b' = displacement.
Area of what? Every geometrical shape has a different formula to find its area. The simplest one: to find the area of a rectangle whose edge lengths are h and w, area = h*w.
formula of find the volume of dish
area of sector = (angle at centre*area of circle)/360
Wattage = Outage Voltage + Outage Wattage
It depends on the wattage of the unit. When that is found use the formula; Amps = Watts/Volts to find your answer.
The formula you are looking for is W = I x E. Watts = Amps x Volts. If you can find the two values on the fixture's label then use the formula to find the wattage of the fixture.
Wattage X hours used per day X number of days used ÷ 1000
"W" for watts, or wattage
It depends on the wattage the fan draws. A simple way to work it out is to use a simple formula. Find where it tells you the wattage and then devide by the house hold voltage and that will give you how much current is being used in amps
P(watts) = I (current) times E (voltage) hence it is known as the pie formula P=IE
Manipulate the following equation, to make I the subject: P = I2R, where P = power, I =current, and R = resistance.
Water heaters come in many sizes. Look for the wattage of the heater and use the following formula to find the current. I = W/E = Watts/Volts. As you can see a voltage and wattage of the tank is needed to find the current.
The amperage that a chandelier draws is based on the amount of bulbs and the wattage of the bulbs used in the fixture. Count the amount of bulbs and multiply that number by the wattage of the bulbs. Take this total wattage and use this formula. I = W/E. Amps = Watts/ Volts.
Wattage= current*voltage*power factor. Wattage=VI Cos(@)
You have to make a decision as to what you want to make your priority loads. Once you have established this, add up all the load wattages. Use the following formula if you can not find what the wattage load is from the nameplate of the device. W = amps x volts. Generators are rated in wattage. Your load wattage total must be under the load wattage capacity of the generator.