0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many rods are there in 160 rods?
In 160 rods, there are 160 rods. This is a funny question.. ha ha ha. not.
What does it mean to get prosecuted?
If someone is saying you accused them. It means you have used the words. "You told". Or. "You did". So it is saying someone did that or someone did this. But if you have used the words "Did you". That is not accusing. Hope this helped. x
How many rods are in six furlongs?
240 rods.
How many rods in 66 feet?
4 rods
How many rods is in a mile?
there are 320 rods in a mile
Is it possible to damage lifters if valves were adjusted wrong and resulted in bending the push rods?
Yes, it's possible. But the push rods usually take the worst of it.
What happens if you switch intake and exhaust push rods on a 1999 Pontaic Grand Am with a 3.4L?
You will bend the rods and the valves and you will 'break' the engine
You have long push rods and short push rods which ones go where?
long ones are exhaust
What do push rods push?
The rocker arm.
Why does 3.4 make noise after installing push rods?
Double check the new push rods, they come in many lengths.
How do you replace push rods on a 1996 dodge neon?
Being an overhead cam engine, a Neon doesn't have push rods.
Can you run stock push rods with roller rockers?
It's not really about what rockers you run. If you have guide plates, you need hardened push rods.
How to replace push rods on a 2002 Chrysler sebring gtc?
A 2002 Chrysler Sebring has an overhead cam engine. That means it does not have push rods.
Why would the push rods be bending in a Chevy 400 motor when its not running yet?
You either have the WRONG push rods in it, or you are not adjusting the valves correctly. There is a special way to adjust the valves and it would take to long to explain it to you. They don't just tighten all the way down. You need to get a book and READ about adjusting the valves.
What do you torque the rocker arms to when you reistall push-rods on 2003 3.4 Pontiac?
what should you torque the rocker arms to when you reinstall the push-rods to on a 3.4 pontiac
Should curtain rods be professionally installed?
No, curtain rods do not have to be professionally installed. Some curtain rods are tension type rods and don't require hardware installation. For the curtain rods requiring installation, most come with instructions. Simply take your time and follow the instructions and you should be able to install your curtain rod without a professional!
Where can you find push rods for a 1973 dodge dart swinger 318V8?
Any good parts store should be able to get the push rods for you and if they can't try Manciniracing.com.
