if the length and breadth are increased by 5 times each
area becomes 25 times
uhhum i domt know
It is also halved. In general, if you increase any linear measurement of a figure by a certain factor (i.e., stretching the figure so that you obtain a geometrically similar figure), then all linear measurements will increase by the same factor. In this case, all linear measurements of the rectangle are increased by a factor of 0.5 - that includes the length of any side, the perimeter, the half-perimeter, the diagonal, the sum of the diagonals, the length of half the shorter side, or any other linear measurement you can think of.
When a shape is enlarged the multiplying factor is greater than 1. Example : A factor of 7 means that a length of 1cm on the original shape would be represented by a length of 7cm on the enlarged shape.
Scale factor
It is 5!!!! It can be any number
A rectangle 10.5 x 3 will have a perimeter of 27 in.
uhhum i domt know
It will be three times the size. Each length will be multiplied by 3.. Perimeter = h+h+w+w if we multiply each by three then we get 3h+3H+3w+3w = 3P
Scale factor and perimeter are related because if the scale factor is 2, then the perimeter will be doubled. So whatever the scale factor is, that is how many times the perimeter will be enlarged.
44 x 1.5 = 66.
(20,5)
If you assume that 2.5 refers to the scale factor, you multiply each linear measurement by 2.5. This includes the width, the length, and - if you want to use it to construct your new rectangle - the diagonals. It also happens to include the perimeter, but you probably won't need that to construct the rectangle.
It depends on the aspect ratio. If it is a square object then it should scale up evenly. But if it is a rectangle then eventually a large enough scale factor will make it looked stretch on the longer sides.
The ratio of the perimeters is equal to the scale factor. If rectangle #1 has sides L and W, then the perimeter is 2*L1 + 2*W1 = 2*(L1 + W1).If rectangle # 2 is similar to #1 and sides are scaled by a factor S, so that L2 = S*L1 and W2 = S*W1, the perimeter of rectangle #2 is 2*(L2 + W2)= 2*(S*L1 + S*W1) = S*2*(L1 + W1) = S*(perimeter of rectangle #1).
Absolutely nothing. A scale factor of 1 is the same as saying do not change the scale.
9 enlarged by a factor of a number is 9*y
18" is not a possible perimeter measurement. Assume the dimensions of the rectangle are so close to those of a square that the difference can be disregarded. This is the condition when the perimeter is at its minimum. When the rectangle measures approximately 6" x 6", its area = 36 sq ins, its perimeter = 24" For the area to remain constant then as the length increases by a factor n the width must decrease by that same factor. Area = 6n x 6/n : perimeter = 12n + 12/n :so when n = 1, Perimeter = 12 + 12 = 24 As n increases, say n = 2, Perimeter = 24 + 6 = 30 : And the perimeter continues to increase as the rectangle becomes narrower. Eventually, it will become so narrow that for diagram purposes it will appear as a straight line.