0
swimming in beer
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How does a hex editor work in theory?
In the hex editor there are sixteen hex digits (0 to 9, A to F) and each one represents four bits. Two hex digits represent a byte, which can have a value from 00 to FF. This kind of notation is universally used in computing.
How many hex digits can a nibble represents?
A 4-bit nibble has 2^4 = 16 possible representations and we can symbolise any one of these representations using just one hexadecimal (base 16) digit.
What is 1000100.11010010.01000011.10110011 to hexidecimal?
assuming that the full stops break up the binary numbers: Binary 1000100 = Hex 44 Binary 11010010 = Hex D2 Binary 1000011 = Hex 43 Binary 10110011 = Hex B3
What is a hex trillion?
There is no such number.
What is 200 in hex?
C8
What size Allen socket is needed to remove caliper bolt on a 2004 Expedition?
To remove and replace floating caliper mounting bolts. 3/8" and 8mm hex bits are used for General Motors vehicles. 7mm and 1/4" hex bit are used for Ford. 2003-2006 Ford Expedition use the 7MM hex bit. 7MM hex bit does not work on a 2006 Expedition. Looks like it requires a 9MM, the only one that is not included in my hex set. On a 2006 Expedition Limited, the front calipers use a 9MM hex bit while the rear calipers use a 7MM hex bit.
What size hex bit is used on a 2002 GMC Sonoma brake Caliper bolt?
3/8"
Where is hexadecimal is used?
Hexadecimal is used whenever we want to notate a binary value because each hex digit maps directly with each 4 bit nybble (half a byte). A 64-bit binary value can therefore be reduced to a more concise 16-digit hex value.
What is a bit coupler?
i would say you are referring to a small tool, which couples a bit (such as a hex bit, or philips screwdriver bit) to a socket (such as a 3/8" drive socket), so the bit coud then be used with a ratcheting handle.
What size Torx bit do you need to remove the caliper of a 1993 Buick LeSabre?
Actually it is not a Torx bit -- it is a hex. I believe it is the largest one usually included with Hex sets.
What size Allen socket fits caliper bolt on ford expedition 2006 Eddie bour?
On most 2006 Expeditions, the front calipers use a 9MM hex bit while the rear calipers use a 7MM hex bit. 9mm hex bits are not easy to find as singles and will usually only be found as part of large metric hex bit sets. .
What kind of wrench is needed to remove the front caliper bolts on a dodge stratus?
I used a 7mm hex bit socket. Worked fine, but the tool was a little hard to find. the 7mm hex key does not typically come in a L-key set.
What is hexagon drill?
A drill bit with a hex shaft rather than a round one.
What are Hex screwdrivers used for?
Hex, or Allen screwdrivers are for screwing and unscrewing Allen head screws.
What does the Hurling Hex do?
The Hurling Hex is used on a witch's/wizard's broom and causes it to try to hurl the rider off.
What tool is needed to get caliper pins off 1993 blazer?
3/8" hex bit socket
What tool to take off caliper 1997 Chevy lumina?
3/8" hex bit socket.
