0
Degital means of a clock or watch showing the time displayed on the digits rather then the hands or a pointer, expressed as a series of the digits 0 and 1, typically represented by values of a physical quantity such as voltage or magnetic polarization.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How do you set time in digital clock ajanta odc?
how to time set up ajantha degital clock model no: olc 103
How to adjust the zero error in pressure gauge?
step-1:remove the pressure gauge from the equipment when machine is in off condition. step-2:remove the cap and glass of the gauge. step-3: remove the needle of the gauge with a needle puller( a special tool ) step-4: place the same needle indicating zero. step-5: fix the glass and cap as usual. step-5: check(calibrate) the gauge on a dead weight tester with a master degital pressure gauge.
Outline the major factors that have influence the development of the modern electronic degital computer?
to get me anrwers for me
Which of the following is not an input device "scanner, degital camera, printer, digitizer?
Its the camera.
How do you set time in digital clock ajanta odc?
how to time set up ajantha degital clock model no: olc 103
How much is a digital cable dvr?
There is not one set price for Degital cable DVR. You would have to call around your local cable providers to see what kind of special offers they may have. Every provider has their own price.
How to adjust the zero error in pressure gauge?
step-1:remove the pressure gauge from the equipment when machine is in off condition. step-2:remove the cap and glass of the gauge. step-3: remove the needle of the gauge with a needle puller( a special tool ) step-4: place the same needle indicating zero. step-5: fix the glass and cap as usual. step-5: check(calibrate) the gauge on a dead weight tester with a master degital pressure gauge.
Why are scanners classified as input devices?
Because it has no facility to output information directly. Both types of scanner (document or bar-code) work in a similar way. They use a laser beam to scan information (either from a page or a bar-code) - and turn that information into a digital format. The computer (depending on the program) converts the scanned information either into a replica of the original (document) or compares the bar-code against its database. Neither device is designed to outpuit information directly to the user - therefore theey are both input devices only.
What are the key differences between first-and second generation cellular system?
Digital traffic channels: The most notable difference between the two generations is that first generation systems are almost purely analog, where as second generation systems are digital. In particular, the first generation systems are designed to support voice channels using FM; digital traffic is supported only by the use of a modem that converts the digital data into analog form. Second generation systems provide digital traffic channels. These readily support digital data; voice traffic is first encoded in digital form before transmitting. Of course, for second-generation systems, the user traffic (data or digitized voice) must be converted to an analog signal for transmission between the mobile unit and the base station. Encryption: Because all of the user traffic, as well as control traffic, is digitized in second-generation systems, it is a relatively simple matter to encrypt all of the traffic to prevent eavesdropping. All second-generation systems provide this capability, whereas first generation systems send user traffic in the clear, providing no security. Error detection and correction: The digital traffic stream of second-generation systems also lends itself to the use of error detection and correction techniques. The result can be very clear voice reception. Channel access: In first generation systems, each cell supports a number of channels. At any given time a channel is allocated to only one user. Second generation systems also provide multiple channels per cell, but each channel is dynamically shared by a number of users using time division multiple access (TDMA) or code division multiple access (CDMA).
