0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a pipestem triangle?
A pipestem triangle is made from galvanized steel and porcelain pipe. It is used to support a crucible on a ring when it is being heated by a burner.
Pipe with circumference 6 centimeter and length 20 centimeter and that 10 turns of a wire are wrapped around the pipe. what is the length of the wire?
To find this you need to imagine the pipe slit straight down and rolled out. At this point what you have is 10 right triangles, with the base of the triangle being the circumference of the pipe and the height of the triangle being the height of the pipe divided by the number of wrappings. The hypotenuse then is the length of one wrapping. Multiply that number by the number of wrappings and voila, you have the length of the wire.
What are the Uses of a wire triangle?
Are you talking about a pipe stem triangle? It's composed of twisted wire running through three clay pipes in the shape of an equilateral triangle. It is placed on an iron ring attached to a ring stand, and is used to hold a crucible over the flame of a Bunsen burner.
A drain pipe is to be laid between two points One point is 13 m higher in elevation than the other point The pipe is to slope at an 7.5 degrees with the horizontal Compute the length of the drain pipe?
Here we have a triangle with angle A 7.5deg and opposite side O 13m, and we're looking to find the hypotenuse H which would be the drain pipe. Remember sin A=O/H, so H=O/sinA. H=13/sin7.5= 99.6m
Can a obtuse triangle be a triangle?
any triangle is a triangle
What is a glass pipe steam roller?
a pipe that is a steam rolled a tube with a boll in the middle of it
What is the formula on speed and height through a steam pipe?
What is the formula for speed and height thru a steam pipe
Will steam cause galvanized pipe to corrode?
Water does, so I am pretty sure steam will
What type of pipes is called steam pipe or what is the specification of a steam pipe?
Generally, steel pipe, not less than Sch. 40, A-53 or A-120 ERW or DOM. Steam Condensate pipe is sometimes specified at Sch. 80. Steam pipes normally black steel sometimes copper tubing Depending on the pressure what wall thickness is required I installed piping black steel schedule 40 to schedule 120 with steam valves rated to 3000 #
What is pipe stress?
Pipe Stress. pipe carry's alot of things.stress comes into mind at pump connections and steam hangers and the system of steam relies strongly on proper stress points to expand.this is called a steam loop.lets the pipe expand and retract without affecting what it is connected to .stress through out the system can be seen at times even heard
Can black pipe be used in plumbing?
a black pipe can not be used in plumbing.Of course black pipe has many used in "plumbing" gas fitting and steam fittingPneumatic lines are specified as black , Fire suppression systems black pipe, gas piping , oil supply , steam and hydronics black pipe
Pipe clay triangle?
A pipe clay triangle's use is similar to a gauze mat; to steady/hold apparatus on a tripod while usually they are being heated by a Bunsen burner.
Difference between ibr and non ibr boilers?
Steam boiler: Steam boilers under IBR means any closed vessel exceeding 22.75 liters in capacity and which is used expressively for generating steam under pressure and includes any mounting or other fitting attached to such vessel which is wholly or partly under pressure when the steam is shut off. Steam pipes: IBR steam pipe means any pipe through which steam passes from a boiler to a prime mover or other user or both if pressure at which steam passes through such pipes exceeds 3.5 kg/cm2 above atmospheric pressure or such pipe exceeds 254 mm in internal diameter and includes in either case any connected fitting of a steam pipe.
What is pipe clay?
A pipe clay triangle is used to support e.g. a crucible on a tripod over a bunsen flame.
Can be use Seamless pipe in steam boiler?
Yes as seamless is always better
Is it safe enough compressiom fitting in rediator pipe?
No. Compression fittings are NOT for steam pipes
What is the color code for steam pipe in industrial applications?
silver is the color that is generally used.
