Another name for average voltage is the RMS (Root Mean Square). This is a voltage derived from the peak to peak voltage multiplied by .707. If the peak to peak voltage is 170 volts then the average voltage (RMS) would be 170 x .707 = 120 volts.
Lightening1-6 billion volts, 1 average. Thunder is sound waves only and has no voltage.
rms stands for root mean squared. rms voltage is a way of measuring a sort of average alterating current voltage as distinguished from peak-to-peak voltage. Likewise for ac rms current.
In the US the voltage is about 220 volts. This voltage is based upon the average voltage of the AC sine wave. It can peak as high as 240 volts or as low as 210 volts. So these different voltages are actually referring to an average 220 volt system.
It depends on the voltage it runs on. The answer would be the wattage 15,000 divided by the voltage. Example at 240 volts it would run on 62.5 amps.
The voltage in North America can be as low as 110 and as high as 125 volts. The average is about 115 to 117 volts. <><><>><> House voltage in the US is generally 120v line to neutral and 240v line to line. It is referred to as a "120/240v single phase service." Actual voltage can be as low as 110/220 or as high as 125/250.
The RMS value of an AC voltage is VRMS = VPEAK / sqrt(2), where VPEAK = the voltage peak to neutral.AnswerThe average value of a sinusoidal a.c. voltage is zero.
a magnet does not have any voltage, only a magnetic field.
The mean load voltage, in other words the average voltage, is zero in an ac system.
It is usually required in electrical examinations to make calculations. Simple answer to a complicated calculation. Remember, take peak to peak voltage and multiply by .707, the result being average voltage. This is the voltage that electrical test meters read.
1000000 volts
The term is 'alternating voltage', not 'alternate voltage'. For an a.c. voltage or current, the average value is taken over half its wavelength because, over a complete wavelength it is, of course, zero. For a sine wave, the average value (over half a wavelength) is 0.637 Vmax or 0.637 Imax.
no, dc volatage is a type of current direct current, ac is alternating current, average voltage could be any type of voltage ac or dc that maintains a constant rangeAnswerNo. A DC voltage is exactly equivalent to an AC rms-voltage. So, for example, 100 V (DC) is exactly equivalent to 100 V (AC rms). The average value of an AC waveform is zero.
Their is no specific answer because of the shape of potato the average can be .85
Lightening1-6 billion volts, 1 average. Thunder is sound waves only and has no voltage.
I am not entirely sure what you mean, but the average energy per electron is called the voltage, and is measured in units of volts.I am not entirely sure what you mean, but the average energy per electron is called the voltage, and is measured in units of volts.I am not entirely sure what you mean, but the average energy per electron is called the voltage, and is measured in units of volts.I am not entirely sure what you mean, but the average energy per electron is called the voltage, and is measured in units of volts.
Yes, most DMM are ''average responding", giving accurate rms reading if the ac voltage signal is a pure sine wave. They measure the average of the absolute value of ac voltage and are calibrated so that reading are corrected to that of the rms value of a sine wave.Error occur if harmonic are present.
http://en.wikipedia.org/wiki/Alternating_currenthttp://upload.wikimedia.org/math/d/7/f/d7f393582339f50cba0a11328ee51e6b.png