You can factor a polynomial using one of these steps: 1. Factor out the greatest common monomial factor. 2. Look for a difference of two squares or a perfect square trinomial. 3. Factor polynomials in the form ax^2+bx+c into a product of binomials. 4. Factor a polynomial with 4 terms by grouping.
4 is a perfect square an a factor of 1200
Since 30 does not have any square factors greater than one, the expression is in its simplest form.
The conversion factor to change an area in square inches to square feet is 1 square inch is equal to 0.0069427252080 square foot. So, 100 square inches is equal to 0.69427 square feet using this conversion factor.
sqrt(828)factor under radicalsqrt(62 * 23)6sqrt(23)=======
Form factor of an alternating current waveform (signal) is the ratio of the RMS (Root Mean Square) value to the Absolute Average Value (also referred to as the Practical Average Value) of the waveform.In the case of a sinusoidal wave ie., an analogue wave, the form factor is approximately 1.11.In the case of a square wave ie., a digital wave, the RMS and the average values are equal; therefore, the form factor is 1.
Form factor is (RMS value)/(average absolute value) For sine wave form factor = (1/sqrt(2))/(2/pi) = about 1.11
form factor tell about the purity of sine wave
1.15
A saw tooth wave form superimposed over a square wave form is TPZi wave form. Most of the Inverters use this technology instead of pure sine wave form of out put.
Form factor of any periodic wave is [RMS CURRENT]/[AVERAGE CURRENT]. For sinusoidal wave RMS current=I/sqrt(2); AVERAGE current=2I/pi; Therefore, Form factor=[I/sqrt(2)]/[2I/pi] =pi/{2*sqrt(2)} =1.11
As a sinusoidal signal is clipped the waveform approaches a square wave.
due to the form factor .as the form factor of sine wave is 1.1 so, we use its multiples .
Humidity
There are 9 square feet in 1 square yard.
i dont know,,,give me ans
Schmitt trigger converts any type of waveform (such as sine,triangular.........)to square wave.So it is called Square wave converter.