0
13
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is half power beamwidth of broad side array?
In telecommunication, the term beamwidthhas the following meanings:1. In a radio antennapattern, the half power beam width is the angle between the half-power (-3 dB) points of the main lobe, when referenced to the peakeffective radiated power of the main lobe. See beam diameter. Beamwidthis usually but not always expressed in degrees and for the horizontal plane.2. For the optical regime, see
What is the width of a piece of paper?
The answer depends on the piece of paper. You can cut it in half lengthways: it will still be a piece of paper but its width will be half as large!
The perimeter of a rectangle is 152 inches The length exceeds the width by 36 inches What is the length and width?
Do-it-in-your-head method:Length + width is half the perimeter, ie 76 inches;76 - 36 = 40;Half of 40 is 20: this is the width;20 + 36 = 56: this is the length.Job done.
The length of a rectangle is 8 inches more than the width If the preimeter is 212 inches. what is the length and width?
Do-it-in-your-head method: Length + width equals half the perimeter, ie 106; 106 - 8 = 98; half of 98 is 49 which is the width, making the length 57.
What if you decrease the length of a rectangle by 50 percent but leave the width alone how is the area affected?
It is decreased by half. If you decrease the width by half and leave the length alone, you get the same result.
What is half power beamwidth of broad side array?
In telecommunication, the term beamwidthhas the following meanings:1. In a radio antennapattern, the half power beam width is the angle between the half-power (-3 dB) points of the main lobe, when referenced to the peakeffective radiated power of the main lobe. See beam diameter. Beamwidthis usually but not always expressed in degrees and for the horizontal plane.2. For the optical regime, see
What is meant by the half value layer of a homogenous beam?
The half value layer of a homogenous beam is the thickness of the absorber that reduces the intensity of the beam to half the initial (starting) intensity.
What is tension zone?
A2. In a beam supported at both its ends the lower half of the beam will be under tension, and the upper half of the beam will be under compression.
How high is a balance beam?
well a low beam can be from nothing to 1 foot high a medium beam is 2 and a half feet high and a standard high beam is 3 and a half feet high
What is meant by the half value layer of a heterogenous beam?
The half value layer of a heterogenous beam is the thickness of the absorber that reduces the exposure rate to half the initial (starting) exposure.
Width of a cicle is called?
Diameter. Half of the width is called the radius.
How is width of pulse and power content is related?
The width of a pulse and power are related by a term called duty cycle. Full power means the pulse comes ON and Stays ON continuously for 100% duty cycle. No power means pulse is OFF continuously for a 0% duty cycle. 50% duty cycle means pulse stays ON half the time and OFF half the time. Duty cycle can be used to explain the relationship between pulse and power content.
What is the radius of a half circle when you have width and height?
If the half circle is on its flat side, the radius is its height. If the straight part of the half-circle is vertical, the radius is its width.
Is the width of a pencil a centimeter?
No, about half that.
What is the width of a piece of paper?
The answer depends on the piece of paper. You can cut it in half lengthways: it will still be a piece of paper but its width will be half as large!
What is the width of aluminum foil?
In the UK the standard width is 30cm (one foot), and wide width is 45cm (a foot and a half).
What happens to the area of a rectangle if you half the width?
It becomes half of what the original area is.
