It is the angle that can be changed
hj
In mechanical design, a coumpound angle is the resultant of two individual angles that are perpendicular to each other.
The spanner is bent at an angle so that it can easily applied or hold the grip of any 6 sides of nut to achieve the maximum mechanical advantage by moving the handle to and fro in the shortest possible space.
MA = 5 / 0.75 = 6.67 Essentially, its the reciprocal of the sin of the ramp angle
( Assuming mass of object on incline plane is in kilograms (kg) ) . Force pulling down incline on object (kilogram force) = object mass * sin (incline angle) . Force of object acting on and normal to incline (kilogram force) = object mass * cos (incline angle) . Mechanical Advantage = 1 / ( sin ( incline angle ) )
Electrical angle is half of mechanical angle in unipolar electrical machines. In multipolar electrical machines, the relationship between the mechanical angle and electrical angle is Electrical angle = (P/2) x Mechanical angle where: P = Number of poles.
Just change the angle of the wedge. The thinner the wedge, the greater the mechanical advantage.
hj
In mechanical design, a coumpound angle is the resultant of two individual angles that are perpendicular to each other.
True
At the two extremes of the angle of inclination you have no mechanical advantage. At an angle of 0 degrees, the plane is parallel to the effort force so it cannot raise the load. At the angle of 90 degrees, the plane is perpendicular to the effort force so all effort is directed into the plane. Between those two extremes, you have a machine. Divide the length (L) of the inclined plane by its height (H) to find the mechanical advantage. Notice that in the case where the angle of inclination is 0 degrees, H = 0. Division by zero is not allowed in math. (The mechanical advantage is undefined.) In the case where the inclination is 90 degrees, L = 0, 0/L = 0 (No mechanical advantage).
Transverse wave.
Decrease the angle to the horizontal. This is done by making it longer.
Its the reciprocal of the sine of the ramp angle. > 1 / ( sin ( ramp angle ) )
The spokes of a wheel are comparable to levers. Longer spokes give more mechanical advantage. Even in a wheel that is solid, and has no spokes, the greater the diameter, the greater the mechanical advantage.
The spanner is bent at an angle so that it can easily applied or hold the grip of any 6 sides of nut to achieve the maximum mechanical advantage by moving the handle to and fro in the shortest possible space.
let look from the different angle, mechanical engineering and ece has almost equal scope but mechanical have little higher because mechanical has wide variety of subjects and every skilled mechanical engineer has got statisfyed job.... now we look from ece,ece is the easy to learn and has good job outlook,every professsionaly skilled engineerhas good job aspect...