0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is work settings nominal or ordinal?
They are nominal.
What level of measurement is required to determine the mode?
nominal
Is length nominal data?
If you are bothering to measure it, it probably is not nominal data in your study.
Can a histogram be used to display and analyze nominal data?
No, it is not suitable for nominal data.
Is marital status nominal data?
Yes, marital status is nominal data.
What does peak power and continuous nominal power handling in car speakers?
Peak power is the highest rated output of the speaker when loud (or peak) parts hit. Continuous/nominal power is the average output at normal and continuous listening levels. If you have the Peak Power rating, you can figure out the nominal level by multiplying the peak power by the square root of two (0.707). Peak Power * 0.707 = Nominal Power.
What is emcr condition of Thermal power plant?
tmcr=turbine maximum continuous rating bmcr=boiler maximum continuous rating
What is the ton rating for heil air conditioner model nac248aka4?
This is a 4-ton nominal rating.
What is ECR of boilers?
Economic Continuous Rating (ECR)
What does a 15 amp continuous duty rating mean for a power strip?
USA homes are wired with wiring to sustain 15 amps continuous duty per outlet this is the rating is the same for a power strip.
What does PN 40 mean?
Pressure Nominal 40; 40 bar pressure rating for European flange
What is pressure rating in PSI for PN?
PN is pressure nominal. The number following is in bar = 14.5 psi/bar.
Does Sheetrock have fire rating by itself?
Yes, the average 1/2" thick board has a nominal 30 minute fire resistance.
What is nominal pressure?
Nominal, in this context, refers to the "face value". So in this case it means what the gauge "face" is indicating. Also called gauge pressure. The difference between nominal pressure and actual pressure depends on whether gauge is a calibrated instrument and is indicating the actual pressure.Nominal pressure means rated pressure, that is a nominal pressure rating applied to vehicle parts.Scroll down to related links and look at "Definition of nominal pressure".
Can you have an 18 amp appliance on a 20 amp circuit?
You should not exceed 80% of the breaker rating for a continuous load. Therefore, the continuous load should not exceed 16 amps.
The nec requires that continuous load calculations be increased by an additional percent volt-ampere rating?
25
How can you select motor for your required pumps?
WATER availability,line voltage,pump set head in meter,power rating,continuous time rating,prefered copper winding
