A 7.5 quadrangle map is one of the standard topographic maps produced by the USGS. One degree is divided into 60 minutes. A 7.5 quad is 7.5 minutes of longitude wide and 7.5 minutes of latitude high. The scale is 1 to 24,000 meaning 1 inch on the map is 24,000 inches (2,000 feet) on the actual ground. Topographic maps show natural and cultural features. Contour lines, which are actually curves, indicate elevation.
right angle is 90 degrees, one ninth of that is 90 divided by 9, which gives 10degrees
Yes.
hello i like cheese
1 degree = 60 minutes 1 minute = 60 seconds In other words, degrees are traditionally divided into smaller units just the same way as hours.
Degrees are divided into minutes. Minutes are divided into seconds. Degrees, minutes and seconds.Every degree is divided into 60 minutes.
A so-called "quarter-degree map" is a map that depicts an area comprised of 15 minutes (1/4 degree) of latitude by 15 minutes (1/4 degree) of longitude.
They can be divided into any reasonable degree of latitude as long as they depict clearly where a location is on a map. The most common multiple would be 10. Atlases or very huge maps might come in multiples of 1 or 2.
idk thats y im asking thiught you were supose to have the answer the question .
That depends on the scale of the map you use. On a small scale map (Remember, small scale = big area) longitude lines may be 10 or 15 degrees apart, while on a large scale map, they are probably one degree apart or even 15 minutes (one quarter degree) apart. We can measure them as finely as you want to.
It means the map sheet is divided into grid squares... for example, military maps are divided into 1 square kilometer squares, to determine coordinates on various points of the map.
A cadastral map shows how people have divided the land.
a degree
Just like an hour, a degree is also divided into 60 minutes, each of which is divided into 60 seconds - so, one degree has 3600 seconds. Often called "arc-seconds", to avoid confusion.
A 7.5 quadrangle map is one of the standard topographic maps produced by the USGS. One degree is divided into 60 minutes. A 7.5 quad is 7.5 minutes of longitude wide and 7.5 minutes of latitude high. The scale is 1 to 24,000 meaning 1 inch on the map is 24,000 inches (2,000 feet) on the actual ground. Topographic maps show natural and cultural features. Contour lines, which are actually curves, indicate elevation.
They can be divided into any reasonable degree of latitude as long as they depict clearly where a location is on a map. The most common multiple would be 10. Atlases or very huge maps might come in multiples of 1 or 2.
The best degree is the one that leads to your overall career goals and objectives. You must find your vision (dream) first, then you will be able to create the appropriate road map that will make that vision a reality.