3 and 2/3 in.
It is 3/10 of an inch before 2 inches on the ruler
Ever-so-slightly before the third mark (assuming it measures by sixteenths) after 1 inch.
You will not find an ordinary ruler which shows 1.69 inches. This would require each inch to be divided into 100 subdivisions which is not realistic for an ordinary ruler. Normal rulers give numbered lines for inches and either 10 or 16 unnumbered subdivisions of inches (there are other numbers of subdivisions but they are less common). If 10 divisions, then 1.69 inches is a tiny bit less than 1 inch and 7 of the ten divisions. If an inch has 16 divisions then 1 and 11 (of 16) subdivisions is 1.6875 - nearly 1.69 inches.
Three and two thirds divided by one third = 11/1 or 11
1/3 of 11 is 3 2/3.
Just a "smidge" under 3 11/16 inches. That's as close as you're going to get it on a ruler based on 1/16th inch increments. (From a graphic artist who has struggled with this one forever.)
It's almost exactly 11/32" (a little under 3/8"). There is no one-third of an inch on the ruler; only halves, quarters, eighths, and sixteenths. One-third of an inch is about .85 centimeters.
3 inches if on the inches side, 3 centimeters if on the centimeters side.
Almost 3
It is 3/10 of an inch before 2 inches on the ruler
If 1 inch is 2.54cm then 2.54 x 11 = 27.94cm's Nearly a ruler
Ever-so-slightly before the third mark (assuming it measures by sixteenths) after 1 inch.
92 feet and 11 inches
20 feet/15 = 4/3 feet = 11/3feet ... one-third of a foot is 4 inches, so 1 foot 4 inches.
There are 36 inches in one yard. Therefore, 11 yards is equal to 11 x 36 = 396 inches.
There are 12 inches in one foot. Therefore, 11 feet is equal to 11 x 12 = 132 inches.
One and three eighth inches = 11/8 inches; 11/8 divided by six = (11/8)(1/6) = 11/48 of one inch.