0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What's the takeoff for a 30 degree angle?
The takeoff for a 30 degree angle will depend with the offset angle.
What is the formula for a 30 degree angle?
That depends what you want to calculate.
What is 30 degree Celsius in degree Fahrenheit?
Formula: F = (C x 1.8) + 32F = (30 x 1.8) + 32F = 54 + 32Fahrenheit = 86°
Is a 30 degree angle and a 30 degree angle congruent?
Yes and they are both acute angles
How much is 30 times 6?
the answer is 180 the math formula: 30 + 30 + 30 + 30 + 30 + 30 = 180 is the same as the math formula: 30 x 6 = 180.
What's the takeoff for a 30 degree angle?
The takeoff for a 30 degree angle will depend with the offset angle.
The loft of taylormade 2009 burner irons?
I found this information for the Taylor Made Burner XDs. * #4 (21-degree loft; 61.5-degree lie angle; 6.7mm offset) * #5 (23-degree loft; 62-degree lie angle; 6.3mm offset) * #6 (26-degree loft; 62.5-degree lie angle; 6mm offset) * #7 (30-degree loft; 63-degree lie angle; 5.7mm offset) * #8 (34-degree loft; 63.5-degree lie angle; 5.3mm offset) * #9 (39-degree loft; 64-degree lie angle; 5mm offset) * PW (44-degree loft; 64.5-degree lie angle; 4.7mm offset) * SW (49-degree loft; 64.5-degree lie angle; 2mm offset)
What is the formula for a 30 degree angle?
That depends what you want to calculate.
When bending a 12 inch offset using a 30 degree bend what would the distance between the two bends?
Use these numbers when bending offsets: 10 degree bends, multiply the depth of the offset by 6 this will give you the distance between bends. For 20 degree multiply by 2.6, for 30 degree multiply by 2, for 45 degree multiply by 1.4, for 60 degree multiply by 1.2. I use 30 degree bends for all of my offsets, just because its easier to do the math. So your answer would be 24 inches between bends. I have come to the conclusion anybody can bend conduit, its the measuring and marking that requires skill.
When bending a 12 inch offset using 30 degree bends what would the distance between the two bends?
Use these numbers when bending offsets: 10 degree bends, multiply the depth of the offset by 6 this will give you the distance between bends. For 20 degree multiply by 2.6, for 30 degree multiply by 2, for 45 degree multiply by 1.4, for 60 degree multiply by 1.2. I use 30 degree bends for all of my offsets, just because its easier to do the math. So your answer would be 24 inches between bends. I have come to the conclusion anybody can bend conduit, its the measuring and marking that requires skill.
When bending a 12 inch offset using 30 degree BENDS what would be the distance between the two bends?
Use these numbers when bending offsets: 10 degree bends, multiply the depth of the offset by 6 this will give you the distance between bends. For 20 degree multiply by 2.6, for 30 degree multiply by 2, for 45 degree multiply by 1.4, for 60 degree multiply by 1.2. I use 30 degree bends for all of my offsets, just because its easier to do the math. So your answer would be 24 inches between bends. I have come to the conclusion anybody can bend conduit, its the measuring and marking that requires skill.
Why does a box end wrench have a 30 degree offset?
Yes, and add 30 and 60 degree offset too while you're at it. First off, if you work on cars, one type of wrench won't cut it. You need an assortment of different lengths, depths, and types.
What is the total shrinkage of a set of 30 degree offset bends with a depth of 7 in and a set of 22 12 degree opffset bends with a 4 in depth?
30 degree bends -as in a conduit offset- create a 3-4-5 right triangle extrapolating the "3" of the triangle to your 7" offset should result in a shrinkage of approx 2- 1/3 inches. Sinceconduit bends are curved and not exact angles this may not be accurateenough to pre-cut and thread and then bend. I assume that is why you were asking. I also assume you are talking large size conduit. I will leave the 22-1/2 degree question to you.
What is 30 degree Celsius in degree Fahrenheit?
Formula: F = (C x 1.8) + 32F = (30 x 1.8) + 32F = 54 + 32Fahrenheit = 86°
Which is hotter 30 degree celsius or 30 degree Fahrenheit?
30 degrees celsius
A 10-inch beam is in the path of a conduit run from a junction box which is located 38 inches from the beam The beam is to be bypassed by a 30-degree offset with the second offset bend occurring at t?
It is easier that you bend the conduit around the beam or pierce the conduit throough the beam, depending on how big the conduit is.
Show you a 30 degree angle?
30 degree angle
