0
whatever the offset is times it by 1.414 and this will give you your travel then just take off the centres of the 45's and you have your cut length....for instance if the offset is 12 inchs you multiply it by 1.414 you come up with 16.968..meaning 1 foot 4 inchs 15/16 just thought alittle clarity might help if the person was new in trade.
What else can I help you with?
What Formula for long radius 45 degree elbow?
1.414. x offset- Straight of 45's
What is the offset in a 45 degree pipe run?
The offset in a 45-degree pipe run refers to the vertical or horizontal distance a pipe is shifted from its original line due to the angled connection. In practical terms, when a pipe is installed at a 45-degree angle, it creates a diagonal path that results in both vertical and horizontal displacement. The actual offset can be calculated using trigonometric principles based on the length of the pipe run and the angle. Typically, for a 45-degree angle, the horizontal and vertical offsets are equal.
If the formula for 45 degree is 1.4142 what is the formula for 60 degree?
If it's a ratio problem, then 45 is to 1.4142 as 60 is to x 45/1.4142 = 60/x 45x = 84.852 x = 1.8856 Otherwise, there isn't enough info to answer
How do you find the area of a 45- 45 -90 degree triangle?
Depends on the length of the sides ! The simple formula to calculate the area of a triangle is half the base times the height.
What is the Pipe fitting formula for 45 degree elbow?
1.4142 will give you the travel piece C-C then you deduct for the fitting
What Formula for long radius 45 degree elbow?
1.414. x offset- Straight of 45's
Formula for a 45 degree offset?
1.4142 will give the travel piece center to center
Calculate 45 degree offset when the travel is known?
A 45 degree offset has a travel of 200mm. calculate the rise of the offset.
What is oblique offset in surveying?
offset that are not situated 90 degree rather that are situated in any angle like 60 degree or 45 degree
What is the formula for a rolling offset?
In pipefitting, a rolling offset is used to connect two pipes that are not aligned in the same plane. The formula for calculating a rolling offset involves using trigonometry, specifically the Pythagorean theorem and the tangent function. The formula is: Offset = (Travel x tan(Angle)) + (Run / 2), where Travel is the vertical distance between the two pipes, Angle is the angle of the offset, and Run is the horizontal distance between the two pipes.
What is the formula for a 45 degree lateral on 6 inch weld pipe?
formula for a 6" 45 degree lateral onto a 6" main
What multiplier would be used for EMT conduit to make a 45 degree offset bead?
The multiplier for a 45 degree bend is 1.4142 (rounded off to 1.4) times the height of the offset. All offset multipliers are the cosecant of the angle. (inverse of the sine of the angle). However, 45 degree offsets are very difficult to pull wire through and should be avoided. Always bend your EMT to the shallowest angle you can for the distance you have to do it in.
What is the take off formula off 45 degree elbow pipe?
The take off formula of a 45 degree elbow pipe, will depend on what the pipe is on. Sometimes a 45 degree pipe will need a 90 degree right angle turn to come off.
If the formula for 45 degree is 1.4142 what is the formula for 60 degree?
If it's a ratio problem, then 45 is to 1.4142 as 60 is to x 45/1.4142 = 60/x 45x = 84.852 x = 1.8856 Otherwise, there isn't enough info to answer
What is the formula 45 degree elbow?
15.875 x pipe size=
What is the formula for pipe length between 45 degree elbows?
Tan 45/2*dia*1.5*25.4
What is the wheel offset on a 2005 grand prix?
34-45 offset
